[ROVERNET - UK] Timing advoce
Vern Klukas
vern at inkspotco.com
Tue Dec 14 22:24:34 GMT 2004
And no need to remove the cover, just slacking the bolts will allow
it to swing out of the way.
Yours
Vern
>AAAAH, okay thanks!
>F
>On Dec 13, 2004, at 3:24 PM, Paul Smith wrote:
>
>>Timing marks are on the flywheel, view via removing 2" long plate on right
>>hand rear of engine (7/16 spanner).
>>Nominally they are 6BTDC but with lower octane petrol aim for less, like
>>4BTDC.
>>You can use a timing light, swipe some white paint on the line on the
>>flywheel and time it at idle.
>>There is a pointer to line it up against.
>>
>>PVS
>>
>>-----Original Message-----
>>From: Frank Sommers [mailto:gout at comcast.net]
>>Sent: Tuesday, 14 December 2004 10:09 am
>>To: rovernet at lyris.ccdata.com
>>Subject: [ROVERNET - UK] Timing advoce
>>
>>
>>Dear Rovernet,
>>
>>I finally got some time to start playing around with the 2000TC this
>>weekend and started a tuneup. I figured out that you time it
>>statically and how much but could not figure it out beyond that. How is
>>this done? I could not find any timing marks. I would appreciate any
>>advice.
>>thanks
>>Frank
>>
>>
>>_______________________________________________
>>rovernet mailing list
>>rovernet at lyris.ccdata.com
>>To unsubscribe, go to this web page, look near the bottom and follow
>>instructions:
>>http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>>
>>_______________________________________________
>>rovernet mailing list
>>rovernet at lyris.ccdata.com
>>To unsubscribe, go to this web page, look near the bottom and
>>follow instructions:
>>http://mailman.nipltd.com/mailman/listinfo/rovernet
>>
>Frank Sommers
>NOAA Fisheries/NWFSC/Mukilteo Field Facility
>ph 425-347-6935 ex228
>frank.sommers at noaa.gov
>
>
>_______________________________________________
>rovernet mailing list
>rovernet at lyris.ccdata.com
>To unsubscribe, go to this web page, look near the bottom and follow
>instructions:
>http://mailman.nipltd.com/mailman/listinfo/rovernet
--
Vern Klukas I'm a little . . .
Inkspot Type & Design
vern at inkspotco.com
More information about the rovernet
mailing list