[ROVERNET - UK] SD1 and Jensen wheels

[RoverP6 at gmx.de]

This Estate, David?

See my site http://www.roverp6.info/Fotos/Estates/FotosEstates.htm

Rudiger



-----Ursprüngliche Nachricht----- 
Von: "David Walker" <concinnity at woosh.co.nz>
An: <rovernet at lyris.ccdata.com>
Gesendet: Dienstag, 11. Juli 2006 13:47
Betreff: Re: [ROVERNET - UK] SD1 and Jensen wheels


> The P6 Estate (with the efi vitesse motor in it)that was in the classic car
> mags a year or two ago had Jensen Interceptor s2 alloy wheels so they do
> fit.But Jensens used big Austin/Wolseley(A105/110
> Westminster,6/99,6/110Wolseley)wheels- ergo they have the same offset and
> P.C.D. as P5 Rovers -all 15" diameter.P6s have 14" diameter but although the
> standard steel wheels have the same offset and P.C.D. as all P5s,the Rostyle
> equipped ones have a different Austin/BMC connection in that they have the
> same wheels as the 'landcrab'1800/2200 Austin/Morris/Wolseley series front
> wheel drive cars .In order for these wheels,with a half inch difference in
> offset,to fit the P6,Rostyle equipped P6s(a rare option outside N.A.D.A. but
> compulsory on TCs in it)have different hubs to compensate. Put rostyles on
> the standard car and the track narrows.And to answer your question ,I think
> the standard nuts and studs would be fine,but you'll have to go down in
> profile for the tyre,perhaps 195/60r15s.  Cheers,David.             NADA TC
> ,Kenya spec TC,UK TC,3500,3500S,820
> ----- Original Message ----- 
> From: "Kent Kinard" <kkinard at wcc.net>
> To: <rovernet at lyris.ccdata.com>
> Sent: Tuesday, July 11, 2006 1:13 PM
> Subject: Re: [ROVERNET - UK] SD1 and Jensen wheels
>
>
> > No, but they should be easy enough to fit.  I looked at a
> > set in Houston several years ago and I think they would be
> > great.
> >
> > Kent K.
> >
> > On Mon, 10 Jul 2006 18:00:31 -0700 (PDT)
> >   George Phelps <p6_rover at yahoo.com> wrote:
> > > I have a set of SD1 wheels but have not put them on,
> > > so don't know about the caps.  They are available, if
> > > anyone is interested.  As in the interim, I came
> > > across some Jensen 15" alloys, that I am going to use.
> > > Anyone know the size tire, the lug nut and stud info
> > > for these things?
> > >
> > > Thanks
> > > George
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam?  Yahoo! Mail has the best spam protection
> > >around
> > > http://mail.yahoo.com
> > >
> > > _______________________________________________
> > > rovernet mailing list
> > > rovernet at lyris.ccdata.com
> > > To unsubscribe, go to this web page, look near the
> > >bottom and follow instructions:
> > > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > > Back-up list and photos at:
> > > http://autos.groups.yahoo.com/group/Rover_net/
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the bottom and follow
> instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > Back-up list and photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>