[ROVERNET - UK] Rover P6 - twin circuit brake system

[Vern Klukas]

Hate to tell you this, but unless you have a P6B master cylinder, you 
will need two servos to complete the system. Circuit-wise it is quite 
straight forward, if nobody else comes up with a diagram I will 
sketch one out for you.

Yours
Vern


>Hello to all,
>
>I got a request:
>
>"I have bought a twin circuit master cylinder which is reported to 
>be from a P6  for the Benelux
>countries, this is to convert my Daimler Dart to twin circuit 
>brakes. Length of the master cylinder
>is critical and this one suits, I would like to see a diagram of the 
>brake circuit, I assume that
>the P6 was fitted with a remote servo and remote reservoir."
>
>Any information would be appreciated.
>
>Rudiger
>www.RoverP6.info
>
>
>_______________________________________________
>rovernet mailing list
>rovernet at lyris.ccdata.com
>To unsubscribe, go to this web page, look near the bottom and follow 
>instructions:
>http://mailman.nipltd.com/mailman/listinfo/rovernet
>Back-up list and photos at:
>http://autos.groups.yahoo.com/group/Rover_net/


-- 
Vern Klukas                             I'm a little . . .
Inkspot Type & Design
vern at inkspotco.com