[ROVERNET - UK] RE:TC Carb problem

Slatskars slatskars at comcast.net
Tue Sep 4 05:18:39 BST 2007


Fritz,

Take off the air cleaners and push gently on the throttle plates with 
something fairly soft - wooden? I am assuming that you checked to make 
certain that none of the spindle linkage is binding.

Slats
----- Original Message ----- 
From: "Fritz Rauschenberg" <wfritz at mindspring.com>
To: <rovernet at lyris.ccdata.com>
Sent: Monday, September 03, 2007 10:38 AM
Subject: [ROVERNET - UK] RE:TC Carb problem


>
>
> Fritz Rauschenberg
> wfritz at mindspring.com
> EarthLink Revolves Around You.
>
>
>>Help ! Apparently I mal-adjusted the choke cables and upon pulling the
> cables for maximum choke, I have caused the carb spindles to lock in the
> richest position. I have dis-connected the choke cables and pressed on the
> spindles with finger force to no avail. What must I do to free the
> spindles? Should I tap on them or does this involve dis-assembly of some
> level? Any help is greatly appreciated.
>
>>Fritz Rauschenberg
>  69 2000TC
>  Atlanta
>>
>>
>>.
>
>>
>
>>
>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and follow
> instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/ 




More information about the rovernet mailing list