[ROVERNET - UK] SD1 for sale
Robert Heimerl
robertime at cavtel.net
Sun Sep 9 13:57:34 BST 2007
Hi Dirk,
I also have an SD1 and may be interested in one with fewer
"issues."
As Michael asked, where are you and the car located?
Rovernet doesn't tell us.
More details about the car would also be helpful.
Thanks,
Robert (in N. Virginia)
(703) 845-1564
> Hello all,
>
> I met a gentleman who has a SD1 for sale. It is in average
> shape for is age with some rust in the boot area and had a
> retrofit Holley carb. I have too many cars so I said I
> would post a notice on the Rovernet.
>
> I think the car runs but needs the usual stuff that rovers
> need when they sit. I think he will take $1500
>
> If anyone is interested let me know and I will put you in
> contact. The car is local to me so I would be willing to
> assist someone with shipping if they need the help.
>
> Dirk
>
> -----Original Message-----
> From: rovernet-bounces at lyris.ccdata.com
> [mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of
> rovernet-request at lyris.ccdata.com
> Sent: Tuesday, September 04, 2007 7:00 AM
> To: rovernet at lyris.ccdata.com
> Subject: rovernet Digest, Vol 58, Issue 4
>
> Send rovernet mailing list submissions to
> rovernet at lyris.ccdata.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> or, via email, send a message with subject or body 'help'
> to
> rovernet-request at lyris.ccdata.com
>
> You can reach the person managing the list at
> rovernet-owner at lyris.ccdata.com
>
> When replying, please edit your Subject line so it is more
> specific than "Re: Contents of rovernet digest..."
>
>
> [ROVERNET-UK]
>
> Today's Topics:
>
> 1. RE:TC Carb problem (Fritz Rauschenberg)
> 2. Re: RE:TC Carb problem (Slatskars)
> 3. Re: RE:TC Carb problem (Netspace)
>
>
> ----------------------------------------------------------
> ------------
>
> Message: 1
> Date: Mon, 3 Sep 2007 13:38:53 -0400
> From: "Fritz Rauschenberg" <wfritz at mindspring.com>
> Subject: [ROVERNET - UK] RE:TC Carb problem
> To: rovernet at lyris.ccdata.com
> Message-ID: <410-22007913173853515 at mindspring.com>
> Content-Type: text/plain; charset=US-ASCII
>
>
>
> Fritz Rauschenberg
> wfritz at mindspring.com
> EarthLink Revolves Around You.
>
>
> >Help ! Apparently I mal-adjusted the choke cables and
> upon pulling the cables for maximum choke, I have caused
> the carb spindles to lock in the richest position. I have
> dis-connected the choke cables and pressed on the spindles
> with finger force to no avail. What must I do to free the
> spindles? Should I tap on them or does this involve
> dis-assembly of some level? Any help is greatly
> appreciated.
>
> >Fritz Rauschenberg
> 69 2000TC
> Atlanta
> >
> >
> >.
>
> >
>
> >
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the
> bottom and follow instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > Back-up list and photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 3 Sep 2007 21:18:39 -0700
> From: "Slatskars" <slatskars at comcast.net>
> Subject: Re: [ROVERNET - UK] RE:TC Carb problem
> To: <wfritz at mindspring.com>,
> <rovernet at lyris.ccdata.com> Message-ID:
> <007301c7eeaa$acffe150$20381618 at FAMILYROOM> Content-Type:
> text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Fritz,
>
> Take off the air cleaners and push gently on the throttle
> plates with something fairly soft - wooden? I am assuming
> that you checked to make certain that none of the spindle
> linkage is binding.
>
> Slats
> ----- Original Message -----
> From: "Fritz Rauschenberg" <wfritz at mindspring.com>
> To: <rovernet at lyris.ccdata.com>
> Sent: Monday, September 03, 2007 10:38 AM
> Subject: [ROVERNET - UK] RE:TC Carb problem
>
>
> >
> >
> > Fritz Rauschenberg
> > wfritz at mindspring.com
> > EarthLink Revolves Around You.
> >
> >
> >>Help ! Apparently I mal-adjusted the choke cables and
> > upon pulling the cables for maximum choke, I have caused
> > the carb spindles to lock in the richest position. I
> > have dis-connected the choke cables and pressed on the
> spindles with finger force to no avail. What must I do to
> > free the spindles? Should I tap on them or does this
> > involve dis-assembly of some level? Any help is greatly
> appreciated. >
> >>Fritz Rauschenberg
> > 69 2000TC
> > Atlanta
> >>
> >>
> >>.
> >
> >>
> >
> >>
> >>
> >>
> >> _______________________________________________
> >> rovernet mailing list
> >> rovernet at lyris.ccdata.com
> >> To unsubscribe, go to this web page, look near the
> > bottom and follow instructions:
> >> http://mailman.nipltd.com/mailman/listinfo/rovernet
> >> Back-up list and photos at:
> >> http://autos.groups.yahoo.com/group/Rover_net/
> >
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the
> > bottom and follow instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > Back-up list and photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 4 Sep 2007 14:33:24 +1000
> From: "Netspace" <vmitps at netspace.net.au>
> Subject: Re: [ROVERNET - UK] RE:TC Carb problem
> To: <rovernet at lyris.ccdata.com>
> Message-ID: <C5FA40D6B96344E6B35C589CDF7E3B0E at Vista1>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
> reply-type=response
>
> I think he means the jet movers.
>
> PVS
>
> ----- Original Message -----
> From: "Slatskars" <slatskars at comcast.net>
> To: <wfritz at mindspring.com>; <rovernet at lyris.ccdata.com>
> Sent: Tuesday, September 04, 2007 2:18 PM
> Subject: Re: [ROVERNET - UK] RE:TC Carb problem
>
>
> > Fritz,
> >
> > Take off the air cleaners and push gently on the
> > throttle plates with something fairly soft - wooden? I
> > am assuming that you checked to make certain that none
> of the spindle linkage is binding. >
> > Slats
> > ----- Original Message -----
> > From: "Fritz Rauschenberg" <wfritz at mindspring.com>
> > To: <rovernet at lyris.ccdata.com>
> > Sent: Monday, September 03, 2007 10:38 AM
> > Subject: [ROVERNET - UK] RE:TC Carb problem
> >
> >
> >>
> >>
> >> Fritz Rauschenberg
> >> wfritz at mindspring.com
> >> EarthLink Revolves Around You.
> >>
> >>
> >>>Help ! Apparently I mal-adjusted the choke cables and
> upon pulling the >> cables for maximum choke, I have
> caused the carb spindles to lock in the >> richest
> position. I have dis-connected the choke cables and
> pressed on >> the
> >> spindles with finger force to no avail. What must I do
> to free the >> spindles? Should I tap on them or does this
> involve dis-assembly of some >> level? Any help is greatly
> appreciated. >>
> >>>Fritz Rauschenberg
> >> 69 2000TC
> >> Atlanta
> >>>
> >>>
> >>>.
> >>
> >>>
> >>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> rovernet mailing list
> >>> rovernet at lyris.ccdata.com
> >>> To unsubscribe, go to this web page, look near the
> bottom and follow >> instructions:
> >>> http://mailman.nipltd.com/mailman/listinfo/rovernet
> >>> Back-up list and photos at:
> >>> http://autos.groups.yahoo.com/group/Rover_net/
> >>
> >>
> >>
> >> _______________________________________________
> >> rovernet mailing list
> >> rovernet at lyris.ccdata.com
> >> To unsubscribe, go to this web page, look near the
> bottom and follow >> instructions:
> >> http://mailman.nipltd.com/mailman/listinfo/rovernet
> >> Back-up list and photos at:
> >> http://autos.groups.yahoo.com/group/Rover_net/
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the
> > bottom and follow instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
> > Back-up list and photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition. Version: 7.5.485 / Virus
> > Database: 269.13.3/986 - Release Date: 3/09/2007 9:31
> AM >
> >
>
>
>
> ------------------------------
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, scroll to the bottom,
> and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
> End of rovernet Digest, Vol 58, Issue 4
> ***************************************
>
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom
> and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
More information about the rovernet
mailing list