[ROVERNET - UK] 3.9 cam and lifters
peter king
peter at king-co.com
Tue Apr 8 02:48:21 BST 2008
Hi Bill.
I ordered a new cam and lifters through the shop that prepared my =20
3500s block. The cam is an Elgin E-364-S, made in California. =20
Elgin's web site is http://www.elgincams.com/
The lifters are Clevite, part number 213-1664. Made by Dana =20
Corporation in the US (and elsewhere?). This website lists ofices =20
in US and Canada, among others, under MAHLE corporation. http://=20
mahleclevite.com/p_lv_engineparts.asp
I'm not sure if these are the spec you are looking for, but these are =20=
good cam sources in any event.
I hope this is helpful...
Peter
On Apr 7, 2008, at 8:32 PM, Bill Robertson wrote:
>
>
> I'm looking for a new 3.9 cam or such suitable replacement for my =20
> 3500S and wonder what model and year Land Rover or Range Rover is =20
> going to fit right in............next is where to get one .....i'm =20
> in Ontario Canada and to have shipped from UK is a borderline =20
> ransom demand............Also i want to know if anyone has used the =20=
> Rhoads lifters in their cars and if so will the Buick 215 ones =20
> fit........
>
>
>
>
>
> Thanks
>
>
> Bill Robertson
>
> _________________________________________________________________
> Enter today for your chance to win $1000 a day=97today until May =20
> 12th. Learn more at SignInAndWIN.ca
> http://g.msn.ca/ca55/215
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and =20
> follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
More information about the rovernet
mailing list