[ROVERNET - UK] Oil leak in TC
Dermot Harvey
roverman2 at verizon.net
Fri Jan 25 20:33:14 GMT 2008
Hi Gordon,
I think your oil leak is from the O ring between the head and the
block if the head has not been removed for many years. These O rings
get brittle over time and no longer seal the high pressure oil going
to the camshaft etc.
Dermot Harvey
On Jan 24, 2008, at 6:38 PM, rovernet-request at lyris.ccdata.com wrote:
> Send rovernet mailing list submissions to
> rovernet at lyris.ccdata.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> or, via email, send a message with subject or body 'help' to
> rovernet-request at lyris.ccdata.com
>
> You can reach the person managing the list at
> rovernet-owner at lyris.ccdata.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of rovernet digest..."
>
>
> [ROVERNET-UK]
>
> Today's Topics:
>
> 1. Re: Leaky TC (Gordon Harrower)
> 2. Re: Humber Question. (Ben Rodgers)
> 3. Re: Humber Question. (Mark Brown)
> 4. Re: Humber Question. (Ben Rodgers)
> 5. Re: Rover steering wheel (as new) (Brooks)
> 6. Re: Rover steering wheel (as new) (Fritz Rauschenberg)
> 7. Re: Rover steering wheel (as new) (Brooks)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 24 Jan 2008 06:40:53 -0200
> From: Gordon Harrower <griffo at comcast.net>
> Subject: Re: [ROVERNET - UK] Leaky TC
> To: rovernet at lyris.ccdata.com
> Message-ID: <47984F15.3020700 at comcast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> All of your responses help--thanks. Gordon.
>
> Netspace wrote:
>> I have bought thicker gasket material, and I do not cut out the
>> straight parts between the bolt bulges.
>> Makes for a better gasket all round.
>>
>> Check the O ring, it is at the right rear of the block on the same
>> level as the head gasket - it seals the oil feed to the camshaft.
>> I have bought a few of these and most thicknesses will do the job!
>>
>> Also check the triangular plate on the back end of the camshaft is
>> tight, otherwise you get stacks of oil in the cam cover.
>>
>> PVS
>>
>> ----- Original Message ----- From: "Ruotolo Gianluca (MERCATO STAFF)"
>> <gianluca.ruotolo at enel.it>
>> To: <rovernet at lyris.ccdata.com>
>> Sent: Thursday, January 24, 2008 3:02 AM
>> Subject: R: [ROVERNET - UK] Leaky TC
>>
>>
>> I had to change the tappet cover gasket for a little oil leak, and so
>> did two friends of udine on their 2000 Tc.
>> In one case, there was a strong oil leak.
>>
>> The gasket you can order in a rover parts shop is made of cork, mine
>> was hand made of "guarnital", a kind of plastic rubber.
>>
>> Regards, Gianluca.
>>
>>
>> -----Messaggio originale-----
>> Da: rovernet-bounces at lyris.ccdata.com
>> [mailto:rovernet-bounces at lyris.ccdata.com] Per conto di Vern Klukas
>> Inviato: mercoledì 23 gennaio 2008 16.45
>> A: rovernet at lyris.ccdata.com
>> Oggetto: Re: [ROVERNET - UK] Leaky TC
>>
>>
>> The leak cannot be coming from there, that plate seals the water
>> passages, not oil.
>>
>> You either have the o-ring seal between the cylinder head and block
>> leaking, or a badly leaking valve cover gasket. The latter is
>> trivial, but the O-ring requires replacement by pulling the cylinder
>> head. From the amount you describe, I suspect (hope) it is just the
>> valve cover gasket that is at fault.
>>
>> Yours
>> Vern
>>
>>
>>
>>
>>> My '68 TC has developed a strong oil leak that appears to originate
>>> from the "Rear cover plate" (528106) at the back of the cylinder
>>> head. It's bad enough that I lose half a quart of oil every couple
>>> weeks, and am getting lots of oil slicks on my driveway. Is this a
>>> familiar problem for anyone? Is it a typical TC problem? In any
>>> case I'm looking for the "joint washer," i.e. gasket, (566850) that
>>> goes under the plate, although I guess I can make one if I have to.
>>>
>>> Gordon.
>>>
>>>
>>> _______________________________________________
>>> rovernet mailing list
>>> rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 24 Jan 2008 10:00:20 -0400
> From: "Ben Rodgers" <irishrover at netscape.ca>
> Subject: Re: [ROVERNET - UK] Humber Question.
> To: <rovernet at lyris.ccdata.com>
> Message-ID: <000001c85e91$a09f4340$69c63042 at yourc8bh3jaglt>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hello Great Rover Brains Trust!!!
> Just a quick question, when was
> the
> Humber Car Co taken over by Rootes Group or was it taken over prior
> to that
> by maybe Hillman or some other company?????
> Thanks for your help
> Ben
> (irishrover)
>
>
>
>
> FREDERICK (BEN) RODGERS.CD
> Born in Belfast, Northern Ireland,
> Author of "lily and me" a great book and a great read .
> Order on line at amazon
> Visit my web page http://home.netscape.ca/~rodgl/
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 24 Jan 2008 10:10:17 -0400
> From: "Mark Brown" <mark.brown.rover at gmail.com>
> Subject: Re: [ROVERNET - UK] Humber Question.
> To: rovernet at lyris.ccdata.com
> Message-ID:
> <f1363d9e0801240610iee15a5fhb4b60bf50edf42ed at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Ben,
>
> According to Wikipedia:
>
> In 1925 Humber moved into the production of commercial vehicles with
> the purchase of Commer. In 1928 Hillman was added but independence
> ended in 1931 when the Rootes Brothers bought a majority shareholding.
>
> Hope that helps.
>
> Mark Brown
>
>
>
> On Jan 24, 2008 10:00 AM, Ben Rodgers <irishrover at netscape.ca> wrote:
>> Hello Great Rover Brains Trust!!!
>> Just a quick question, when was
>> the
>> Humber Car Co taken over by Rootes Group or was it taken over
>> prior to that
>> by maybe Hillman or some other company?????
>> Thanks for your help
>> Ben
>> (irishrover)
>>
>>
>>
>>
>> FREDERICK (BEN) RODGERS.CD
>> Born in Belfast, Northern Ireland,
>> Author of "lily and me" a great book and a great read .
>> Order on line at amazon
>> Visit my web page http://home.netscape.ca/~rodgl/
>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and
>> follow instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 24 Jan 2008 14:07:23 -0400
> From: "Ben Rodgers" <irishrover at netscape.ca>
> Subject: Re: [ROVERNET - UK] Humber Question.
> To: <rovernet at lyris.ccdata.com>
> Message-ID: <001a01c85eb3$f9cc1e80$abc63042 at yourc8bh3jaglt>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Thanks Mark.
>
> FREDERICK (BEN) RODGERS.CD
> Born in Belfast, Northern Ireland,
> Author of "lily and me" a great book and a great read .
> Order on line at amazon
> Visit my web page http://home.netscape.ca/~rodgl/
>
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 24 Jan 2008 18:16:28 -0400
> From: "Brooks" <restore at nbnet.nb.ca>
> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
> To: <rovernet at lyris.ccdata.com>
> Message-ID: <003601c85ed6$c45e0f10$0100a8c0 at DENNIS>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=response
>
> If there is any interest in this leather 14" Rover steering wheel
> (fits
> P6B)...
> Please let me know otherwise I am sending it to the local flea market.
>
>
> Regards
>
> Dennis
>
>
> ----- Original Message -----
> From: "Brooks" <restore at nbnet.nb.ca>
> To: <rovernet at lyris.ccdata.com>
> Sent: Wednesday, January 23, 2008 4:43 PM
> Subject: [ROVERNET - UK] Rover steering wheel (as new)
>
>
>> Here's the pic of the steering wheel....I thought it had some wood
>> but it
>> is all leather and I bought it for my fathers Rover 3500S....he
>> installed
>> it and used it about twice before we decided to sell the car...we
>> removed
>> this wheel and reinstalled the original .
>> I don't recall exactly what I paid for this wheel but it was not
>> cheap...so I am open to offers and I know it will fit on a P6B and
>> looks
>> great ....14" steering wheel. My email is
>> restore at nbnet.nb.ca for
>> anyone who is interested.
>>
>> http://i205.photobucket.com/albums/bb73/brooksnb/morefamily82.jpg
>>
>> Regards
>>
>> Dennis
>>
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "Geff McCarthy" <geffandjulie at comcast.net>
>> To: <rovernet at lyris.ccdata.com>
>> Sent: Tuesday, January 22, 2008 8:25 PM
>> Subject: RE: [ROVERNET - UK] p6 alternative steering wheels ???
>>
>>
>>> I'd be interested as well!
>>>
>>> AvMedSafe
>>> Geff and Julie McCarthy
>>> 677 NW Melinda Ave
>>> Portland OR 97210
>>> 503-241-8468
>>> 503-799-3809 mobile
>>>
>>> -----Original Message-----
>>> From: rovernet-bounces at lyris.ccdata.com
>>> [mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of Brooks
>>> Sent: Monday, January 21, 2008 2:09 PM
>>> To: rovernet at lyris.ccdata.com
>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>
>>> I still have a brand new wooden rimed one that I was going to use
>>> on My
>>> P6B...it's got the Rover emblem as well...I'll look for a Pic of
>>> it if
>>> you
>>> like..and you can decide from there..
>>>
>>> Dennis
>>> ----- Original Message -----
>>> From: "Aidrian Bridgeman-Sutton" <smokeandsteam at gmail.com>
>>> To: <rovernet at lyris.ccdata.com>
>>> Sent: Monday, January 21, 2008 5:58 PM
>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>
>>>
>>>>
>>> <http://www.moto-lita.co.uk/our-products/your-car/your-
>>> options.aspx?CB_ID=35
>>> &CR_ID=313>
>>>>
>>>> Should lead you to the Rover pages
>>>>
>>>> Aidrian
>>>>
>>>> On Jan 21, 2008 1:52 PM, phing <phing at videotron.ca> wrote:
>>>>> Hi
>>>>> The NADA P6 3500 has power steering , so the standard Leyland
>>>>> truck
>>>>> size
>>>>> steering wheel is a bit redundant .I would like to replace
>>>>> it with a smaller thicker wood rim wheel a la E type Jag .Does
>>>>> any one
>>>>> have a source for such a wheel and the all important hub ??
>>>>
>>>> _______________________________________________
>>>> rovernet mailing list
>>>> rovernet at lyris.ccdata.com
>>>> To unsubscribe, go to this web page, look near the bottom and
>>>> follow
>>>> instructions:
>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>> Back-up list and photos at:
>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.516 / Virus Database: 269.19.8/1235 - Release Date:
>>>> 21/01/2008 9:39 AM
>>>>
>>>>
>>>
>>> _______________________________________________
>>> rovernet mailing list
>>> rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>
>>>
>>> _______________________________________________
>>> rovernet mailing list
>>> rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.5.516 / Virus Database: 269.19.9/1237 - Release Date:
>>> 22/01/2008 11:04 AM
>>>
>>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and follow
>> instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
>> 269.19.9/1239 - Release Date: 23/01/2008 10:24 AM
>>
>>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 24 Jan 2008 17:29:01 -0500
> From: "Fritz Rauschenberg" <wfritz at mindspring.com>
> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
> To: rovernet at lyris.ccdata.com
> Message-ID: <410-22008142422291187 at mindspring.com>
> Content-Type: text/plain; charset=US-ASCII
>
> May I suggest e-Bay rather than a local flea market? You'll be
> more likely
> to find the proper home for it and at a better price!
>
> Fritz Rauschenberg
> wfritz at mindspring.com
> EarthLink Revolves Around You.
>
>
>> [Original Message]
>> From: Brooks <restore at nbnet.nb.ca>
>> To: <rovernet at lyris.ccdata.com>
>> Date: 1/24/2008 5:16:40 PM
>> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
>>
>> If there is any interest in this leather 14" Rover steering wheel
>> (fits
>> P6B)...
>> Please let me know otherwise I am sending it to the local flea
>> market.
>>
>>
>> Regards
>>
>> Dennis
>>
>>
>> ----- Original Message -----
>> From: "Brooks" <restore at nbnet.nb.ca>
>> To: <rovernet at lyris.ccdata.com>
>> Sent: Wednesday, January 23, 2008 4:43 PM
>> Subject: [ROVERNET - UK] Rover steering wheel (as new)
>>
>>
>>> Here's the pic of the steering wheel....I thought it had some
>>> wood but
> it
>>> is all leather and I bought it for my fathers Rover 3500S....he
> installed
>>> it and used it about twice before we decided to sell the car...we
> removed
>>> this wheel and reinstalled the original .
>>> I don't recall exactly what I paid for this wheel but it was not
>>> cheap...so I am open to offers and I know it will fit on a P6B and
> looks
>>> great ....14" steering wheel. My email is
>>> restore at nbnet.nb.ca for
>>> anyone who is interested.
>>>
>>> http://i205.photobucket.com/albums/bb73/brooksnb/morefamily82.jpg
>>>
>>> Regards
>>>
>>> Dennis
>>>
>>>
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "Geff McCarthy" <geffandjulie at comcast.net>
>>> To: <rovernet at lyris.ccdata.com>
>>> Sent: Tuesday, January 22, 2008 8:25 PM
>>> Subject: RE: [ROVERNET - UK] p6 alternative steering wheels ???
>>>
>>>
>>>> I'd be interested as well!
>>>>
>>>> AvMedSafe
>>>> Geff and Julie McCarthy
>>>> 677 NW Melinda Ave
>>>> Portland OR 97210
>>>> 503-241-8468
>>>> 503-799-3809 mobile
>>>>
>>>> -----Original Message-----
>>>> From: rovernet-bounces at lyris.ccdata.com
>>>> [mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of Brooks
>>>> Sent: Monday, January 21, 2008 2:09 PM
>>>> To: rovernet at lyris.ccdata.com
>>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>>
>>>> I still have a brand new wooden rimed one that I was going to
>>>> use on My
>>>> P6B...it's got the Rover emblem as well...I'll look for a Pic of
>>>> it if
>>>> you
>>>> like..and you can decide from there..
>>>>
>>>> Dennis
>>>> ----- Original Message -----
>>>> From: "Aidrian Bridgeman-Sutton" <smokeandsteam at gmail.com>
>>>> To: <rovernet at lyris.ccdata.com>
>>>> Sent: Monday, January 21, 2008 5:58 PM
>>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>>
>>>>
>>>>>
>>>>
> <http://www.moto-lita.co.uk/our-products/your-car/your-options.aspx?
> CB_ID=35
>>>> &CR_ID=313>
>>>>>
>>>>> Should lead you to the Rover pages
>>>>>
>>>>> Aidrian
>>>>>
>>>>> On Jan 21, 2008 1:52 PM, phing <phing at videotron.ca> wrote:
>>>>>> Hi
>>>>>> The NADA P6 3500 has power steering , so the standard Leyland
>>>>>> truck
>>>>>> size
>>>>>> steering wheel is a bit redundant .I would like to replace
>>>>>> it with a smaller thicker wood rim wheel a la E type
>>>>>> Jag .Does any
> one
>>>>>> have a source for such a wheel and the all important hub ??
>>>>>
>>>>> _______________________________________________
>>>>> rovernet mailing list
>>>>> rovernet at lyris.ccdata.com
>>>>> To unsubscribe, go to this web page, look near the bottom and
>>>>> follow
>>>>> instructions:
>>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>>> Back-up list and photos at:
>>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Free Edition.
>>>>> Version: 7.5.516 / Virus Database: 269.19.8/1235 - Release Date:
>>>>> 21/01/2008 9:39 AM
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> rovernet mailing list
>>>> rovernet at lyris.ccdata.com
>>>> To unsubscribe, go to this web page, look near the bottom and
>>>> follow
>>>> instructions:
>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>> Back-up list and photos at:
>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>
>>>>
>>>> _______________________________________________
>>>> rovernet mailing list
>>>> rovernet at lyris.ccdata.com
>>>> To unsubscribe, go to this web page, look near the bottom and
>>>> follow
>>>> instructions:
>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>> Back-up list and photos at:
>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.516 / Virus Database: 269.19.9/1237 - Release Date:
>>>> 22/01/2008 11:04 AM
>>>>
>>>>
>>>
>>> _______________________________________________
>>> rovernet mailing list
>>> rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
>>> 269.19.9/1239 - Release Date: 23/01/2008 10:24 AM
>>>
>>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and follow
> instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>
>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Thu, 24 Jan 2008 19:38:12 -0400
> From: "Brooks" <restore at nbnet.nb.ca>
> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
> To: <wfritz at mindspring.com>, <rovernet at lyris.ccdata.com>
> Message-ID: <004a01c85ee2$2fc7c420$0100a8c0 at DENNIS>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Thanks...
> I don't know about others...but I find Ebay is dropping off...bad
> bids and
> scams are popping up too much. I have no concern to sell here or
> where I get
> cash in hand but the last resort is ebay for me untill I see it
> improve.
> ----- Original Message -----
> From: "Fritz Rauschenberg" <wfritz at mindspring.com>
> To: <rovernet at lyris.ccdata.com>
> Sent: Thursday, January 24, 2008 6:29 PM
> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
>
>
>> May I suggest e-Bay rather than a local flea market? You'll be more
>> likely
>> to find the proper home for it and at a better price!
>>
>> Fritz Rauschenberg
>> wfritz at mindspring.com
>> EarthLink Revolves Around You.
>>
>>
>>> [Original Message]
>>> From: Brooks <restore at nbnet.nb.ca>
>>> To: <rovernet at lyris.ccdata.com>
>>> Date: 1/24/2008 5:16:40 PM
>>> Subject: Re: [ROVERNET - UK] Rover steering wheel (as new)
>>>
>>> If there is any interest in this leather 14" Rover steering wheel
>>> (fits
>>> P6B)...
>>> Please let me know otherwise I am sending it to the local flea
>>> market.
>>>
>>>
>>> Regards
>>>
>>> Dennis
>>>
>>>
>>> ----- Original Message -----
>>> From: "Brooks" <restore at nbnet.nb.ca>
>>> To: <rovernet at lyris.ccdata.com>
>>> Sent: Wednesday, January 23, 2008 4:43 PM
>>> Subject: [ROVERNET - UK] Rover steering wheel (as new)
>>>
>>>
>>>> Here's the pic of the steering wheel....I thought it had some
>>>> wood but
>> it
>>>> is all leather and I bought it for my fathers Rover 3500S....he
>> installed
>>>> it and used it about twice before we decided to sell the car...we
>> removed
>>>> this wheel and reinstalled the original .
>>>> I don't recall exactly what I paid for this wheel but it was not
>>>> cheap...so I am open to offers and I know it will fit on a P6B and
>> looks
>>>> great ....14" steering wheel. My email is
>>>> restore at nbnet.nb.ca for
>>>> anyone who is interested.
>>>>
>>>> http://i205.photobucket.com/albums/bb73/brooksnb/morefamily82.jpg
>>>>
>>>> Regards
>>>>
>>>> Dennis
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Geff McCarthy" <geffandjulie at comcast.net>
>>>> To: <rovernet at lyris.ccdata.com>
>>>> Sent: Tuesday, January 22, 2008 8:25 PM
>>>> Subject: RE: [ROVERNET - UK] p6 alternative steering wheels ???
>>>>
>>>>
>>>>> I'd be interested as well!
>>>>>
>>>>> AvMedSafe
>>>>> Geff and Julie McCarthy
>>>>> 677 NW Melinda Ave
>>>>> Portland OR 97210
>>>>> 503-241-8468
>>>>> 503-799-3809 mobile
>>>>>
>>>>> -----Original Message-----
>>>>> From: rovernet-bounces at lyris.ccdata.com
>>>>> [mailto:rovernet-bounces at lyris.ccdata.com] On Behalf Of Brooks
>>>>> Sent: Monday, January 21, 2008 2:09 PM
>>>>> To: rovernet at lyris.ccdata.com
>>>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>>>
>>>>> I still have a brand new wooden rimed one that I was going to
>>>>> use on
>>>>> My
>>>>> P6B...it's got the Rover emblem as well...I'll look for a Pic
>>>>> of it if
>>>>> you
>>>>> like..and you can decide from there..
>>>>>
>>>>> Dennis
>>>>> ----- Original Message -----
>>>>> From: "Aidrian Bridgeman-Sutton" <smokeandsteam at gmail.com>
>>>>> To: <rovernet at lyris.ccdata.com>
>>>>> Sent: Monday, January 21, 2008 5:58 PM
>>>>> Subject: Re: [ROVERNET - UK] p6 alternative steering wheels ???
>>>>>
>>>>>
>>>>>>
>>>>>
>> <http://www.moto-lita.co.uk/our-products/your-car/your-
>> options.aspx?CB_ID=35
>>>>> &CR_ID=313>
>>>>>>
>>>>>> Should lead you to the Rover pages
>>>>>>
>>>>>> Aidrian
>>>>>>
>>>>>> On Jan 21, 2008 1:52 PM, phing <phing at videotron.ca> wrote:
>>>>>>> Hi
>>>>>>> The NADA P6 3500 has power steering , so the standard Leyland
>>>>>>> truck
>>>>>>> size
>>>>>>> steering wheel is a bit redundant .I would like to replace
>>>>>>> it with a smaller thicker wood rim wheel a la E type
>>>>>>> Jag .Does any
>> one
>>>>>>> have a source for such a wheel and the all important hub ??
>>>>>>
>>>>>> _______________________________________________
>>>>>> rovernet mailing list
>>>>>> rovernet at lyris.ccdata.com
>>>>>> To unsubscribe, go to this web page, look near the bottom and
>>>>>> follow
>>>>>> instructions:
>>>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>>>> Back-up list and photos at:
>>>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>>>
>>>>>>
>>>>>> --
>>>>>> No virus found in this incoming message.
>>>>>> Checked by AVG Free Edition.
>>>>>> Version: 7.5.516 / Virus Database: 269.19.8/1235 - Release Date:
>>>>>> 21/01/2008 9:39 AM
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> rovernet mailing list
>>>>> rovernet at lyris.ccdata.com
>>>>> To unsubscribe, go to this web page, look near the bottom and
>>>>> follow
>>>>> instructions:
>>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>>> Back-up list and photos at:
>>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> rovernet mailing list
>>>>> rovernet at lyris.ccdata.com
>>>>> To unsubscribe, go to this web page, look near the bottom and
>>>>> follow
>>>>> instructions:
>>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>>> Back-up list and photos at:
>>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Free Edition.
>>>>> Version: 7.5.516 / Virus Database: 269.19.9/1237 - Release Date:
>>>>> 22/01/2008 11:04 AM
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> rovernet mailing list
>>>> rovernet at lyris.ccdata.com
>>>> To unsubscribe, go to this web page, look near the bottom and
>>>> follow
>>>> instructions:
>>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>>> Back-up list and photos at:
>>>> http://autos.groups.yahoo.com/group/Rover_net/
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
>>>> 269.19.9/1239 - Release Date: 23/01/2008 10:24 AM
>>>>
>>>>
>>>
>>> _______________________________________________
>>> rovernet mailing list
>>> rovernet at lyris.ccdata.com
>>> To unsubscribe, go to this web page, look near the bottom and follow
>> instructions:
>>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>>> Back-up list and photos at:
>>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>>
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the bottom and follow
>> instructions:
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at:
>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.516 / Virus Database: 269.19.10/1241 - Release Date:
>> 24/01/2008 9:58 AM
>>
>
>
>
> ------------------------------
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, scroll to the bottom, and
> follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
> Would digest users please change the subject and show which topic
> to which you are referring. The archive can't work properly
> without your help. Thanks.
>
> End of rovernet Digest, Vol 64, Issue 6
> ***************************************
More information about the rovernet
mailing list