>
From bsaunders at firstva.com Sun Nov 4 07:38:04 2012
From: bsaunders at firstva.com (Ben Saunders)
Date: Sun, 4 Nov 2012 09:38:04 -0500
Subject: [Rovernet ] Rover 3500S
Message-ID: <75257EC5BA274340B33907F83C0BE256@SD1>
Here is 1970 Rover 3500S that should be original but a look under the bonnet
will be necessary.
http://martinsburg.craigslist.org/ctd/3311751611.html
Ben & Cathy Saunders
P O Box 846
Columbia, Va. 23038
(434) 842-3667
From geffandjulie at comcast.net Sun Nov 4 07:52:26 2012
From: geffandjulie at comcast.net (Geoffrey McCarthy)
Date: Sun, 4 Nov 2012 15:52:26 +0100
Subject: [Rovernet ] Rover 3500S
In-Reply-To: <75257EC5BA274340B33907F83C0BE256@SD1>
References: <75257EC5BA274340B33907F83C0BE256@SD1>
Message-ID: <1549E860-0A51-4B41-BAF7-C9BD76928BC0@comcast.net>
Looks very complete, needs boot lid emblem, which are available. In W Virginia, salt is used on the roads, so a good search for rust will be essential.
AvMedSafe
Geoffrey W McCarthy MD MBA
5037993809
Sent from my iPad
On Nov 4, 2012, at 15:38, "Ben Saunders" <bsaunders at firstva.com> wrote:
>
> Here is 1970 Rover 3500S that should be original but a look under the bonnet
> will be necessary.
> http://martinsburg.craigslist.org/ctd/3311751611.html
> Ben & Cathy Saunders
> P O Box 846
> Columbia, Va. 23038
> (434) 842-3667
>
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From veetwinrider at yahoo.com Sun Nov 4 09:12:08 2012
From: veetwinrider at yahoo.com (roland)
Date: Sun, 4 Nov 2012 08:12:08 -0800 (PST)
Subject: [Rovernet ] Stuff For Sale
Message-ID: <1352045528.82205.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
9 Baldwin oil filters.
Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
Folding air pump, fits on trunk board.
Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
roland, Roverless.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
From veetwinrider at yahoo.com Sun Nov 4 09:14:56 2012
From: veetwinrider at yahoo.com (roland)
Date: Sun, 4 Nov 2012 08:14:56 -0800 (PST)
Subject: [Rovernet ] Additional Part For Sale
Message-ID: <1352045696.86088.YahooMailClassic@web181006.mail.ne1.yahoo.com>
All, forgot to mention I have a differential for an 1966(?) auto trans P5 I was going to install in my 4 speed to lower the gear ratio and make it more pleasant on the freeways. I forget the ratio. I bought it from Chris awhile back, too heavy to ship, maybe relay it somehow? How about $100?
roland
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/f9b4371a/attachment.html>
From irishrover1 at live.com Sun Nov 4 08:46:08 2012
From: irishrover1 at live.com (Frederick Ben Rodgers)
Date: Sun, 4 Nov 2012 12:46:08 -0300
Subject: [Rovernet ] Stuff For Sale
In-Reply-To: <1352045528.82205.YahooMailClassic@web181003.mail.ne1.yahoo.com>
References: <1352045528.82205.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <COL111-W56211988F7FCF71AD26A6787650@phx.gbl>
Hi Roland
I'd be interested in the Baldwin oil filters, I believe they fit both P5 and P4. I'd like to take 4- 6 or all if no one else asks.
Cheers Ben
Author of LILY & ME , and THE ROYAL NAVY & ME
Visit blog and website wwwirishroversbooks.com
> Date: Sun, 4 Nov 2012 08:12:08 -0800
> From: veetwinrider at yahoo.com
> To: Rovernet at rovernet.ca
> Subject: [Rovernet ] Stuff For Sale
>
>
> Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
>
> 9 Baldwin oil filters.
>
> Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
>
> Folding air pump, fits on trunk board.
>
> Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
>
> roland, Roverless.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/fcbfb38d/attachment.html>
From RoverP6 at gmx.de Sun Nov 4 13:35:43 2012
From: RoverP6 at gmx.de (RoverP6 at gmx.de)
Date: Sun, 4 Nov 2012 21:35:43 +0100
Subject: [Rovernet ] seen on Flickr: Canadian 2000 TC
References: <75257EC5BA274340B33907F83C0BE256@SD1>
Message-ID: <E2607B1A7A6C42669836C7545C654B9E@rw>
http://www.flickr.com/photos/daveseven/8152922563/
Rudiger
www.RoverP6.info
From peterhut at activ8.net.au Mon Nov 5 14:12:28 2012
From: peterhut at activ8.net.au (Peter Huttemeier)
Date: Tue, 06 Nov 2012 08:12:28 +1100
Subject: [Rovernet ] Rover Performance Perception & Facts
Message-ID: <2oag98hph5ktudaasae80rk48udttbj0jb@4ax.com>
One of the recent points of discussion on the Rover Car Club of
Australia discussion group was the performance figures of our older
Rovers, both compared with different Rover models from different
periods and also compared to other contemporary makes.
This discussion prompted one of our discussion group members to do
some research, consulting published performance data from road tests
of the period and tabulating them to form some meaningful results.
The review is titled "Rover Perception & Facts" and includes objective
comparative data for Rover P4, P5, P5B, P6 and P6B.
The article (in pdf format) can be downloaded from the Club web site.
Let the debate continue.
http://www.rovercarclubaust.asn.au/page1.htm
Cheers,
Peter Huttemeier
Webmaster
Rover Car Club of Australia Inc
http://www.rovercarclubaust.asn.au/
http://www.flickr.com/photos/rccapics/
From magnet at roverclub.org Mon Nov 5 16:15:07 2012
From: magnet at roverclub.org (Magnet)
Date: Mon, 05 Nov 2012 18:15:07 -0500
Subject: [Rovernet ] Rover Performance Perception & Facts
In-Reply-To: <2oag98hph5ktudaasae80rk48udttbj0jb@4ax.com>
References: <2oag98hph5ktudaasae80rk48udttbj0jb@4ax.com>
Message-ID: <5098487B.4030406@roverclub.org>
Very interesting article, Peter. Thanks!
-- Bill Daddis
====================================================
On 05-Nov-12 4:12 PM, Peter Huttemeier wrote:
> One of the recent points of discussion on the Rover Car Club of
> Australia discussion group was the performance figures of our older
> Rovers, both compared with different Rover models from different
> periods and also compared to other contemporary makes.
>
> This discussion prompted one of our discussion group members to do
> some research, consulting published performance data from road tests
> of the period and tabulating them to form some meaningful results.
>
> The review is titled "Rover Perception& Facts" and includes objective
> comparative data for Rover P4, P5, P5B, P6 and P6B.
>
> The article (in pdf format) can be downloaded from the Club web site.
> Let the debate continue.
>
> http://www.rovercarclubaust.asn.au/page1.htm
>
> Cheers,
>
> Peter Huttemeier
> Webmaster
> Rover Car Club of Australia Inc
> http://www.rovercarclubaust.asn.au/
> http://www.flickr.com/photos/rccapics/
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From veetwinrider at yahoo.com Tue Nov 6 06:04:07 2012
From: veetwinrider at yahoo.com (roland)
Date: Tue, 6 Nov 2012 05:04:07 -0800 (PST)
Subject: [Rovernet ] Stuff For Sale
In-Reply-To: <1352045528.82205.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <1352207047.67088.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Folks, the oil filters have been spoken for, sorry, wish I had more to sell. I believe I found a good factory jack for the Rover. It's the typical twin legged, crank type that fits into the body hole. I'll double check today if it's working. I believe I had one bad one with stripped threads. Hope it's not this one.
I have a Rover shift knob, never installed in the box.
I believe I have a tool set for a P6, in a pouch. Pretty sure it's complete. Will look for it today.
roland, clearing out the garage.
--- On Sun, 11/4/12, roland <veetwinrider at yahoo.com> wrote:
Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
9 Baldwin oil filters.
Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
Folding air pump, fits on trunk board.
Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
roland, Roverless.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/ba19824f/attachment.html>
From veetwinrider at yahoo.com Tue Nov 6 06:04:07 2012
From: veetwinrider at yahoo.com (roland)
Date: Tue, 6 Nov 2012 05:04:07 -0800 (PST)
Subject: [Rovernet ] Stuff For Sale
In-Reply-To: <1352045528.82205.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <1352207047.67088.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Folks, the oil filters have been spoken for, sorry, wish I had more to sell. I believe I found a good factory jack for the Rover. It's the typical twin legged, crank type that fits into the body hole. I'll double check today if it's working. I believe I had one bad one with stripped threads. Hope it's not this one.
I have a Rover shift knob, never installed in the box.
I believe I have a tool set for a P6, in a pouch. Pretty sure it's complete. Will look for it today.
roland, clearing out the garage.
--- On Sun, 11/4/12, roland <veetwinrider at yahoo.com> wrote:
Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
9 Baldwin oil filters.
Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
Folding air pump, fits on trunk board.
Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
roland, Roverless.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/ba19824f/attachment-0001.html>
From tom at rymes.net Tue Nov 6 06:35:39 2012
From: tom at rymes.net (Tom Rymes)
Date: Tue, 06 Nov 2012 08:35:39 -0500
Subject: [Rovernet ] Stuff For Sale
In-Reply-To: <1352207047.67088.YahooMailClassic@web181003.mail.ne1.yahoo.com>
References: <1352207047.67088.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <5099122B.6060407@rymes.net>
FWIW, oil filters for the P5 are available (like most other engine
parts) from Rovers North in Vermont. Just tell them that you are buying
it for your 2.6L NADA gasoline Land Rover and they'll know what you need.
Tom
On 11/06/2012 8:04 AM, roland wrote:
> Folks, the oil filters have been spoken for, sorry, wish I had more to sell. I believe I found a good factory jack for the Rover. It's the typical twin legged, crank type that fits into the body hole. I'll double check today if it's working. I believe I had one bad one with stripped threads. Hope it's not this one.
>
> I have a Rover shift knob, never installed in the box.
>
> I believe I have a tool set for a P6, in a pouch. Pretty sure it's complete. Will look for it today.
>
> roland, clearing out the garage.
>
> --- On Sun, 11/4/12, roland <veetwinrider at yahoo.com> wrote:
>
>
>
> Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
>
> 9 Baldwin oil filters.
>
> Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
>
> Folding air pump, fits on trunk board.
>
> Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
>
> roland, Roverless.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/ba19824f/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From veetwinrider at yahoo.com Tue Nov 6 07:02:37 2012
From: veetwinrider at yahoo.com (roland)
Date: Tue, 6 Nov 2012 06:02:37 -0800 (PST)
Subject: [Rovernet ] Stuff For Sale
In-Reply-To: <1352207047.67088.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <1352210557.27974.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Geez, I'm making a mess of this. Guess that what happens when I get up at the same time I did for the last 7 months on daylight savings time and then post things on the internet.
The shift knob is a leather aftermarket item with the Rover logo on it. Made in the USA by Kingsborne Products., San Marcos CA. I don't know if I can attach a photo here, but if anyone wants one of it, I will be happy to provide it. Thanks.
roland
--- On Tue, 11/6/12, roland <veetwinrider at yahoo.com> wrote:
From: roland <veetwinrider at yahoo.com>
Subject: Re: [Rovernet ] Stuff For Sale
To: "rovernet" <Rovernet at rovernet.ca>, "Rovernet" <rovernet at rovernet.ca>
Date: Tuesday, November 6, 2012, 5:04 AM
Folks, the oil filters have been spoken for, sorry, wish I had more to sell. I believe I found a good factory jack for the Rover. It's the typical twin legged, crank type that fits into the body hole. I'll double check today if it's working. I believe I had one bad one with stripped threads. Hope it's not this one.
I have a Rover shift knob, never installed in the box.
I believe I have a tool set for a P6, in a pouch. Pretty sure it's complete. Will look for it today.
roland, clearing out the garage.
--- On Sun, 11/4/12, roland <veetwinrider at yahoo.com> wrote:
Hi all, since selling off the P5, I still have some stuff left over and before I hit ebay with it all, I thought I'd offer them here first.
9 Baldwin oil filters.
Aluminum "Snail Shell", links muffler air cleaner to oil bath housing.
Folding air pump, fits on trunk board.
Please make offers as I don't know what these are worth, plus add some for shipping. If I come across more, I'll post. Thanks.
roland, Roverless.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121104/d3a3a1f9/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/ba19824f/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/132f114e/attachment.html>
From veetwinrider at yahoo.com Tue Nov 6 19:22:41 2012
From: veetwinrider at yahoo.com (roland)
Date: Tue, 6 Nov 2012 18:22:41 -0800 (PST)
Subject: [Rovernet ] Rover Parts 2
Message-ID: <1352254961.19562.YahooMailClassic@web181005.mail.ne1.yahoo.com>
Hi all, just found the P6 tool kit. It is complete and almost unused condition. It's not perfect as in new, but in pretty darn good original condition. I can take pictures if needed. All three wrenches made by "Super Slim" are in very good condition, with only one appearing ever used. The spark plug socket and lever bar look unused as does the tire gauge with the Rover emblem. The screwdriver, made by "Alfrid", has been used and has some chrome peeled at the very tip. The pliers are made by "G. Plumpton", looks new as does the small adjustable wrench made by "King Dick". Even the pouch is in good to excellent condition, even the string.
I don't know what this is worth and I listed the makers of the tools so you can verify they are the proper ones for the car. I know it sounds like a sales pitch, but I'm pretty amazed by the condition, really.
I've found a lug wrench for a P5, the one that looks a bit like a starting handle.
I've also found 2 starting handles, a shorter one with a spinning handle on the end and a longer one.
The jack I found doesn't feel too good, maybe the gears aren't meshing properly, but it did seem to be able to lift the back of my truck a bit.
I have 5 speedo cables, but don't know what they fit. 3 are 63" long and two are 48" long. Appear unused, but dingy from storage.
A generator of unknown origin or funtion,but I believe it came with my P5.
Starter, unknown fit or condition . Maybe there's a part number for matching up?
I don't know what these items are worth, so offers are appreciated.
Thanks.
roland
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121106/a37a7a7b/attachment.html>
From tom at rymes.net Wed Nov 7 18:08:04 2012
From: tom at rymes.net (Tom Rymes)
Date: Wed, 7 Nov 2012 20:08:04 -0500
Subject: [Rovernet ] P4 110 in Alabama - $3,000
Message-ID: <26B221BC-255D-487E-A550-477FE66F16A4@rymes.net>
Looks like it could be a good one!
http://bham.craigslist.org/cto/3383040803.html
Tom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121107/df903d14/attachment.html>
From tom at rymes.net Wed Nov 7 18:13:09 2012
From: tom at rymes.net (Tom Rymes)
Date: Wed, 7 Nov 2012 20:13:09 -0500
Subject: [Rovernet ] SD1 3500 in Yakima, WA - $3,000
Message-ID: <D8C42A28-42E0-4A23-8CED-E40C431151EF@rymes.net>
Looks like its in excellent condition. 5-speed.
http://yakima.craigslist.org/cto/3341639871.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121107/d3f9b04a/attachment.html>
From veetwinrider at yahoo.com Sat Nov 10 09:00:08 2012
From: veetwinrider at yahoo.com (roland)
Date: Sat, 10 Nov 2012 08:00:08 -0800 (PST)
Subject: [Rovernet ] Rover Parts
Message-ID: <1352563208.67983.YahooMailClassic@web181004.mail.ne1.yahoo.com>
Hi all, there has been interest in the P6 tool roll kit. I had contacted one of the P6 suppliers on what they go for. He told me he does not have a complete kit, but one that is 75% complete and he wants 45GBP which google translates to $71, plus he wanted VAT (n/a here) and shipping. Hope that clears things up. Offers?
roland
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121110/50420b0e/attachment.html>
From aboasberg at webtv.net Sat Nov 10 09:04:35 2012
From: aboasberg at webtv.net (Albert Boasberg)
Date: Sat, 10 Nov 2012 16:04:35 GMT
Subject: [Rovernet ] Rover Parts
Message-ID: <BLU168-DS838B435335DF7871AB38AB56F0@phx.gbl>
Dear Roland:
I'd be interested in chatting with him.
Could you please send me the contact info?
Thanks.
Albert
From geffandjulie at comcast.net Sat Nov 10 11:21:50 2012
From: geffandjulie at comcast.net (Geoffrey McCarthy)
Date: Sat, 10 Nov 2012 19:21:50 +0100
Subject: [Rovernet ] Rover Parts
In-Reply-To: <1352563208.67983.YahooMailClassic@web181004.mail.ne1.yahoo.com>
References: <1352563208.67983.YahooMailClassic@web181004.mail.ne1.yahoo.com>
Message-ID: <F744A964-02E1-4DA7-8A6C-DDBD73534F03@comcast.net>
I might be interested, as my tool kit is somewhat deteriorated. Is it in USA?
AvMedSafe
Geoffrey W McCarthy MD MBA
5037993809
Sent from my iPad
On Nov 10, 2012, at 17:00, roland <veetwinrider at yahoo.com> wrote:
>
> Hi all, there has been interest in the P6 tool roll kit. I had contacted one of the P6 suppliers on what they go for. He told me he does not have a complete kit, but one that is 75% complete and he wants 45GBP which google translates to $71, plus he wanted VAT (n/a here) and shipping. Hope that clears things up. Offers?
>
> roland
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121110/50420b0e/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From veetwinrider at yahoo.com Sat Nov 10 16:18:57 2012
From: veetwinrider at yahoo.com (roland)
Date: Sat, 10 Nov 2012 15:18:57 -0800 (PST)
Subject: [Rovernet ] Rover Parts
In-Reply-To: <F744A964-02E1-4DA7-8A6C-DDBD73534F03@comcast.net>
Message-ID: <1352589537.16133.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Yep, it's in the USA.
roland
--- On Sat, 11/10/12, Geoffrey McCarthy <geffandjulie at comcast.net> wrote:
From: Geoffrey McCarthy <geffandjulie at comcast.net>
Subject: Re: [Rovernet ] Rover Parts
To: "Rovernet" <rovernet at rovernet.ca>
Cc: "rovernet" <Rovernet at rovernet.ca>
Date: Saturday, November 10, 2012, 10:21 AM
I might be interested, as my tool kit is somewhat deteriorated. Is it in USA?
AvMedSafe
Geoffrey W McCarthy MD MBA
5037993809
Sent from my iPad
On Nov 10, 2012, at 17:00, roland <veetwinrider at yahoo.com> wrote:
>
> Hi all, there has been interest in the P6 tool roll kit. I had contacted one of the P6 suppliers on what they go for. He told me he does not have a complete kit, but one that is 75% complete and he wants 45GBP which google translates to $71, plus he wanted VAT (n/a here) and shipping. Hope that clears things up. Offers?
>
> roland
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121110/50420b0e/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121110/be6d78e2/attachment.html>
From bsaunders at firstva.com Sun Nov 11 06:30:56 2012
From: bsaunders at firstva.com (Ben Saunders)
Date: Sun, 11 Nov 2012 08:30:56 -0500
Subject: [Rovernet ] Rover Parts
In-Reply-To: <1352589537.16133.YahooMailClassic@web181003.mail.ne1.yahoo.com>
References: <F744A964-02E1-4DA7-8A6C-DDBD73534F03@comcast.net>
<1352589537.16133.YahooMailClassic@web181003.mail.ne1.yahoo.com>
Message-ID: <F9EEBD58A7C04B3CB4711B657BF59FB6@SD1>
Where are you located?
Ben
-----Original Message-----
From: rovernet-bounces at rovernet.ca [mailto:rovernet-bounces at rovernet.ca] On
Behalf Of roland
Sent: Saturday, November 10, 2012 6:19 PM
To: Rovernet
Subject: Re: [Rovernet ] Rover Parts
Yep, it's in the USA.
roland
--- On Sat, 11/10/12, Geoffrey McCarthy <geffandjulie at comcast.net> wrote:
From: Geoffrey McCarthy <geffandjulie at comcast.net>
Subject: Re: [Rovernet ] Rover Parts
To: "Rovernet" <rovernet at rovernet.ca>
Cc: "rovernet" <Rovernet at rovernet.ca>
Date: Saturday, November 10, 2012, 10:21 AM
I might be interested, as my tool kit is somewhat deteriorated. Is it in
USA?
AvMedSafe
Geoffrey W McCarthy MD MBA
5037993809
Sent from my iPad
On Nov 10, 2012, at 17:00, roland <veetwinrider at yahoo.com> wrote:
>
> Hi all, there has been interest in the P6 tool roll kit. I had contacted
one of the P6 suppliers on what they go for. He told me he does not have a
complete kit, but one that is 75% complete and he wants 45GBP which google
translates to $71, plus he wanted VAT (n/a here) and shipping. Hope that
clears things up. Offers?
>
> roland
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachm
> ents/20121110/50420b0e/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/2
0121110/be6d78e2/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2624/5886 - Release Date: 11/10/12
From veetwinrider at yahoo.com Sun Nov 11 06:43:45 2012
From: veetwinrider at yahoo.com (roland)
Date: Sun, 11 Nov 2012 05:43:45 -0800 (PST)
Subject: [Rovernet ] Rover Parts
In-Reply-To: <F9EEBD58A7C04B3CB4711B657BF59FB6@SD1>
Message-ID: <1352641425.98120.YahooMailClassic@web181002.mail.ne1.yahoo.com>
Hi Ben, I'm in the San Francisco Bay Area.
Roland
--- On Sun, 11/11/12, Ben Saunders <bsaunders at firstva.com> wrote:
From: Ben Saunders <bsaunders at firstva.com>
Subject: Re: [Rovernet ] Rover Parts
To: "'Rovernet'" <rovernet at rovernet.ca>
Date: Sunday, November 11, 2012, 5:30 AM
Where are you located?
Ben
-----Original Message-----
From: rovernet-bounces at rovernet.ca [mailto:rovernet-bounces at rovernet.ca] On
Behalf Of roland
Sent: Saturday, November 10, 2012 6:19 PM
To: Rovernet
Subject: Re: [Rovernet ] Rover Parts
Yep, it's in the USA.
roland
--- On Sat, 11/10/12, Geoffrey McCarthy <geffandjulie at comcast.net> wrote:
From: Geoffrey McCarthy <geffandjulie at comcast.net>
Subject: Re: [Rovernet ] Rover Parts
To: "Rovernet" <rovernet at rovernet.ca>
Cc: "rovernet" <Rovernet at rovernet.ca>
Date: Saturday, November 10, 2012, 10:21 AM
I might be interested, as my tool kit is somewhat deteriorated. Is it in
USA?
AvMedSafe
Geoffrey W McCarthy MD MBA
5037993809
Sent from my iPad
On Nov 10, 2012, at 17:00, roland <veetwinrider at yahoo.com> wrote:
>
> Hi all, there has been interest in the P6 tool roll kit. I had contacted
one of the P6 suppliers on what they go for. He told me he does not have a
complete kit, but one that is 75% complete and he wants 45GBP which google
translates to $71, plus he wanted VAT (n/a here) and shipping. Hope that
clears things up. Offers?
>
> roland
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachm
> ents/20121110/50420b0e/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/2
0121110/be6d78e2/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2624/5886 - Release Date: 11/10/12
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121111/56450afa/attachment.html>
From RoverP6 at gmx.de Mon Nov 12 23:06:48 2012
From: RoverP6 at gmx.de (RoverP6 at gmx.de)
Date: Tue, 13 Nov 2012 07:06:48 +0100
Subject: [Rovernet ] "special" P6 3500 - known ?
References: <75257EC5BA274340B33907F83C0BE256@SD1>
<E2607B1A7A6C42669836C7545C654B9E@rw>
Message-ID: <54D97F9F5A8548D9BC01836E0581BD6B@rw>
http://www.stancemovement.com/2011/05/mafia-status-1968-rover-p6-upclose-x-personal/
Rudiger
www.RoverP6.info
From raymond.wilkins at bigpond.com Mon Nov 12 23:42:34 2012
From: raymond.wilkins at bigpond.com (Ray Wilkins)
Date: Tue, 13 Nov 2012 17:42:34 +1100
Subject: [Rovernet ] "special" P6 3500 - known ?
In-Reply-To: <54D97F9F5A8548D9BC01836E0581BD6B@rw>
References: <75257EC5BA274340B33907F83C0BE256@SD1>
<E2607B1A7A6C42669836C7545C654B9E@rw>
<54D97F9F5A8548D9BC01836E0581BD6B@rw>
Message-ID: <50A1EBDA.9040901@bigpond.com>
This is certainly a very good looking car. However, it does seem to have
quite a few inconsistencies. The author says it is a 3500S but it is
Automatic, it has a NADA bonnet (Hood) but is Right hand Drive. I've not
seen the chrome 'Automatic' lettering under the V8 badge on the back
(maybe a US thing) and it doesn't seen to have the roof mounted aerial.
It took some doing but it appears from the website, it is based in
Trinidad and Tobago in the Caribbean. Does anyone have any figures on
(or if) these cars were exported to the Caribbean from the UK?
Cheers,
Ray Wilkins
Rosebud, Australia
1976 P6B
On 13/11/2012 5:06 PM, RoverP6 at gmx.de wrote:
> http://www.stancemovement.com/2011/05/mafia-status-1968-rover-p6-upclose-x-personal/
>
>
> Rudiger
> www.RoverP6.info
>
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
>
From gjkzscruggs at verizon.net Tue Nov 13 15:48:43 2012
From: gjkzscruggs at verizon.net (Scruggs Family)
Date: Tue, 13 Nov 2012 17:48:43 -0500
Subject: [Rovernet ] Special 3500S
In-Reply-To: <mailman.1.1352833203.20140.rovernet_rovernet.ca@rsj20.rhostjh.com>
References: <mailman.1.1352833203.20140.rovernet_rovernet.ca@rsj20.rhostjh.com>
Message-ID: <08c901cdc1f1$08939060$19bab120$@net>
Looking at the 3500S... says it's a '68... were the V8s produced that early?
It has had things added like the Rover emblem in the grill and the mesh in
the center scoop, which did not come on that hood. The grill is Series II
much later than '68. The wire wheels are not OE and they look like 15".
The bumpers look Euro and not NADA. They did export P6s to 'the islands'...
I had for a short while a RHD 2000TC that came from somewhere in the
Caribbean. NADA cars did not say 'automatic' if mine is the norm. Good to
see it on the road and taken care of... but not my taste.
Gross Scruggs
Annapolis, MD
From renovations.plus at hotmail.com Tue Nov 13 17:05:12 2012
From: renovations.plus at hotmail.com (Dennis .)
Date: Tue, 13 Nov 2012 20:05:12 -0400
Subject: [Rovernet ] Special 3500S
In-Reply-To: <08c901cdc1f1$08939060$19bab120$@net>
References: <mailman.1.1352833203.20140.rovernet_rovernet.ca@rsj20.rhostjh.com>,
<08c901cdc1f1$08939060$19bab120$@net>
Message-ID: <BAY145-W194330F3158FA7FE38B9D795530@phx.gbl>
I tend to agree this car has had a quite a few changes , but looks nice to me :) ... The 3500S only came to the NADA market as an automatic in the early years as far as I know and the home market comparison was the 3500...no S and was indeed standard tranny.
> From: gjkzscruggs at verizon.net
> To: rovernet at rovernet.ca
> Date: Tue, 13 Nov 2012 17:48:43 -0500
> Subject: [Rovernet ] Special 3500S
>
>
> Looking at the 3500S... says it's a '68... were the V8s produced that early?
> It has had things added like the Rover emblem in the grill and the mesh in
> the center scoop, which did not come on that hood. The grill is Series II
> much later than '68. The wire wheels are not OE and they look like 15".
> The bumpers look Euro and not NADA. They did export P6s to 'the islands'...
> I had for a short while a RHD 2000TC that came from somewhere in the
> Caribbean. NADA cars did not say 'automatic' if mine is the norm. Good to
> see it on the road and taken care of... but not my taste.
>
> Gross Scruggs
> Annapolis, MD
>
>
>
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121113/f7c4dace/attachment.html>
From lacpsyd6 at msn.com Thu Nov 15 14:00:06 2012
From: lacpsyd6 at msn.com (LANCE LA CERTE PSY D)
Date: Thu, 15 Nov 2012 14:00:06 -0700
Subject: [Rovernet ] Winter project, what find
Message-ID: <COL111-W358C481E728D9303CB258383520@phx.gbl>
Hey Everyone,
First Rudiger needs to find the correct serial number for this car and then someone else needs to bid on it for a winter project (LOL!!!!)
http://www.ebay.com/itm/1-43-ROVER-2000-P6-BARN-FIND-DIORAMA-HUBBYS-CHRISTMAS-DONE-/281018273875?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item416dfe9053
Lance La Certe, Psy.D.Ecrasez l'infame
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121115/91d422ff/attachment.html>
From RoverP6 at gmx.de Thu Nov 15 14:05:10 2012
From: RoverP6 at gmx.de (RoverP6 at gmx.de)
Date: Thu, 15 Nov 2012 22:05:10 +0100
Subject: [Rovernet ] Winter project, what find
References: <COL111-W358C481E728D9303CB258383520@phx.gbl>
Message-ID: <0296DDA3480B4F9B9D9F4F262AC21F66@rw>
ha ha ....
Rudiger
www.RoverP6.info
-----Urspr?ngliche Nachricht-----
Von: "LANCE LA CERTE PSY D" <lacpsyd6 at msn.com>
An: "Rovernet" <rovernet at rovernet.ca>
Gesendet: Donnerstag, 15. November 2012 22:00
Betreff: [Rovernet ] Winter project, what find
Hey Everyone,
First Rudiger needs to find the correct serial number for this car and then
someone else needs to bid on it for a winter project (LOL!!!!)
http://www.ebay.com/itm/1-43-ROVER-2000-P6-BARN-FIND-DIORAMA-HUBBYS-CHRISTMAS-DONE-/281018273875?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item416dfe9053
Lance La Certe, Psy.D.Ecrasez l'infame
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121115/91d422ff/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
From vern at inkspotco.com Thu Nov 15 14:06:37 2012
From: vern at inkspotco.com (Vern Klukas)
Date: Thu, 15 Nov 2012 13:06:37 -0800
Subject: [Rovernet ] Winter project, what find
In-Reply-To: <COL111-W358C481E728D9303CB258383520@phx.gbl>
References: <COL111-W358C481E728D9303CB258383520@phx.gbl>
Message-ID: <262549AA-82B0-426C-AC75-F934DAD7F6E6@inkspotco.com>
I saw this, I thought it was quite brilliant.
Yours
Vern
On 2012-11-15, at 1:00 PM, LANCE LA CERTE PSY D <lacpsyd6 at msn.com> wrote:
>
>
> Hey Everyone,
> First Rudiger needs to find the correct serial number for this car and then someone else needs to bid on it for a winter project (LOL!!!!)
> http://www.ebay.com/itm/1-43-ROVER-2000-P6-BARN-FIND-DIORAMA-HUBBYS-CHRISTMAS-DONE-/281018273875?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item416dfe9053
>
> Lance La Certe, Psy.D.Ecrasez l'infame
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121115/91d422ff/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
Inkspot Type & Design 250 864 5619 in at inkspotco.com
From gianluca.ruotolo at enel.com Fri Nov 16 02:45:05 2012
From: gianluca.ruotolo at enel.com (gianluca.ruotolo at enel.com)
Date: Fri, 16 Nov 2012 10:45:05 +0100
Subject: [Rovernet ] R: Winter project, what find
In-Reply-To: <COL111-W358C481E728D9303CB258383520@phx.gbl>
References: <COL111-W358C481E728D9303CB258383520@phx.gbl>
Message-ID: <39DB493C9E968A40AD2FA5F90D4B959602341EE8@E3088LMQ.risorse.enel>
Bella!|
Ciao, best regards, GR.
-----Messaggio originale-----
Da: rovernet-bounces at rovernet.ca [mailto:rovernet-bounces at rovernet.ca] Per conto di LANCE LA CERTE PSY D
Inviato: gioved? 15 novembre 2012 22:00
A: Rovernet
Oggetto: [Rovernet ] Winter project, what find
Hey Everyone,
First Rudiger needs to find the correct serial number for this car and then someone else needs to bid on it for a winter project (LOL!!!!)
http://www.ebay.com/itm/1-43-ROVER-2000-P6-BARN-FIND-DIORAMA-HUBBYS-CHRISTMAS-DONE-/281018273875?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item416dfe9053
Lance La Certe, Psy.D.Ecrasez l'infame
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121115/91d422ff/attachment.html>
**************************************
Join the back-up list or look at or post photos at:
http://autos.groups.yahoo.com/group/Rover_net/
From irishrover1 at live.com Sun Nov 18 10:52:21 2012
From: irishrover1 at live.com (Frederick Ben Rodgers)
Date: Sun, 18 Nov 2012 14:52:21 -0300
Subject: [Rovernet ] Carbon Coating Exhaust Manifolds???
Message-ID: <COL111-W530386C3A25CAE2BDA6BD287570@phx.gbl>
Hi Folks
Any one had their P4 exhaust manifold carbon coated (ceramic etc) and if so did it lower the heat in engine compartment, are there any other benefits etc. Would appreciate any advice, warnings etc.
Cheers Ben (irishrover)
Author of LILY & ME , and THE ROYAL NAVY & ME
Visit blog and website wwwirishroversbooks.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121118/7be859d9/attachment.html>
From sdibdin at gmail.com Sun Nov 18 11:36:40 2012
From: sdibdin at gmail.com (Steven Dibdin)
Date: Sun, 18 Nov 2012 10:36:40 -0800
Subject: [Rovernet ] Carbon Coating Exhaust Manifolds???
In-Reply-To: <COL111-W530386C3A25CAE2BDA6BD287570@phx.gbl>
References: <COL111-W530386C3A25CAE2BDA6BD287570@phx.gbl>
Message-ID: <8B363C70-69B0-4712-8E2C-3A3D6DB6DA19@gmail.com>
Hey Ben
I looked into it for my 2000tc and decided against it.
It does lower engine bay temps but it holds extra heat into the manifold. I had heard this can make the manifold brittle and shorten its life.
Knowing that TC manifolds can crack with age and vibration I didn't want to risk it.
Just my pennithworth.
Best,
Steven
Sent from a small screen, please excuse any typing errors.
On Nov 18, 2012, at 9:52, Frederick Ben Rodgers <irishrover1 at live.com> wrote:
>
>
> Hi Folks
> Any one had their P4 exhaust manifold carbon coated (ceramic etc) and if so did it lower the heat in engine compartment, are there any other benefits etc. Would appreciate any advice, warnings etc.
> Cheers Ben (irishrover)
>
> Author of LILY & ME , and THE ROYAL NAVY & ME
> Visit blog and website wwwirishroversbooks.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121118/7be859d9/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From giannid at bigpond.com Sun Nov 18 13:29:15 2012
From: giannid at bigpond.com (Gianni D'Ortenzio)
Date: Mon, 19 Nov 2012 07:29:15 +1100
Subject: [Rovernet ] Carbon Coating Exhaust Manifolds???
In-Reply-To: <COL111-W530386C3A25CAE2BDA6BD287570@phx.gbl>
References: <COL111-W530386C3A25CAE2BDA6BD287570@phx.gbl>
Message-ID: <9C747159-4AF2-4A5E-873E-321470A950B2@bigpond.com>
I had the manifolds on my P3 and P5B ceramic coated and importantly they look real fine!
At the performance level of these vehicles I doubt it makes much difference, but decreasing engine compartment heat levels in the P5B might improve the longevity of other heat sensitive components, rubber/wiring etc.
Still, I have done lots of things for looks alone! Vanity, Vanity, all is vanity.
Cheers Gianni
On 19/11/2012, at 4:52 AM, Frederick Ben Rodgers wrote:
>
>
> Hi Folks
> Any one had their P4 exhaust manifold carbon coated (ceramic etc) and if so did it lower the heat in engine compartment, are there any other benefits etc. Would appreciate any advice, warnings etc.
> Cheers Ben (irishrover)
>
> Author of LILY & ME , and THE ROYAL NAVY & ME
> Visit blog and website wwwirishroversbooks.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121118/7be859d9/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
From veetwinrider at yahoo.com Sun Nov 25 10:55:38 2012
From: veetwinrider at yahoo.com (roland)
Date: Sun, 25 Nov 2012 09:55:38 -0800 (PST)
Subject: [Rovernet ] Rover Parts Still For Sale
Message-ID: <1353866138.52479.YahooMailClassic@web181006.mail.ne1.yahoo.com>
Hi all, hope everyone had a good Thanks Giving. I still have some Rover parts left, but will be going on Ebay soon. The tool kit has been spoken for. Still have the factory jack, two engine crank handles, one lug wrench, 5 speedo cables of unknown origin, the Rover aftermarket leather shift knob and the snail shell for the oil bath air cleaner to the air inlet muffler. Thanks.
Roland
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121125/2790d017/attachment.html>
From lacpsyd6 at msn.com Wed Nov 28 10:23:09 2012
From: lacpsyd6 at msn.com (LANCE LA CERTE PSY D)
Date: Wed, 28 Nov 2012 10:23:09 -0700
Subject: [Rovernet ] Nice article
Message-ID: <COL111-W192550DB59517CE974E0DC835D0@phx.gbl>
Thought everyone might enjoy this rather nice article a friend of mine stumbled upon.
Enjoy
http://www.curbsideclassic.com/curbside-classics-european/storage-field-classic-rover-2000tc/
Lance La Certe, Psy.D.Ecrasez l'infame
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121128/31dd8da4/attachment.html>
From scott at scottsoldautorubber.com.au Sun Nov 18 15:50:16 2012
From: scott at scottsoldautorubber.com.au (Scott)
Date: Mon, 19 Nov 2012 08:50:16 +1000
Subject: [Rovernet ] Carbon Coating Exhaust Manifolds???
Message-ID: <20121118225018.D63151F064@bne3-0002wm.server-mail.com>
Vanity is fine in small doses, have you considered seeing anyone about it? :)
I used to paint mine with gloss tyre black, smelt a bit at first, but they used to
bake into a new looking manifold. Stayed that way for a long time.
Thankyou,
Scott.
> I had the manifolds on my P3 and P5B ceramic coated and importantly
they look real fine!
>
> At the performance level of these vehicles I doubt it makes much
difference, but decreasing engine compartment heat levels in the P5B might
improve the longevity of other heat sensitive components, rubber/wiring etc.
>
> Still, I have done lots of things for looks alone! Vanity, Vanity, all is vanity.
>
> Cheers Gianni
>
> On 19/11/2012, at 4:52 AM, Frederick Ben Rodgers wrote:
>
> >
> >
> > Hi Folks
> > Any one had their P4 exhaust manifold carbon coated (ceramic etc)
and if so did it lower the heat in engine compartment, are there any other
benefits etc. Would appreciate any advice, warnings etc.
> > Cheers Ben (irishrover)
> >
> > Author of LILY & ME , and THE ROYAL NAVY & ME
> > Visit blog and website wwwirishroversbooks.com
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
<http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/2
0121118/7be859d9/attachment.html>
> > **************************************
> > Join the back-up list or look at or post photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
> >
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
-- 9 - 5.00 Monday to Friday.
New email address- scott at scottsoldautorubber.com.au
www.scottsoldautorubber.com.au
Automotive Rubber and Seals for Many Makes and Models,
P.O. Box 105, Mount Waverley 3149, Victoria, Australia.
Phone and Fax: + 61- 3 - 9563 3023
http://www.xe.net/pca/
(Currency Converter)
Closed Saturday and Sunday.
From gharrower200 at gmail.com Wed Nov 28 11:12:10 2012
From: gharrower200 at gmail.com (Gordon Harrower)
Date: Wed, 28 Nov 2012 13:12:10 -0500
Subject: [Rovernet ] P5 Wheels Needed
Message-ID: <CACqdim8_fkkc+pjAK=c4c7sM=Ud2AxpDELhPTUdZRMwDiuys5w@mail.gmail.com>
Hello,
I'm looking for a complete set of plain old wheels for my P5. The ones
that came with it are older (possibly from a P4) and two are bent
irreparably, making tire balancing impossible. I'd like five, but would be
willing to piece together a set.
Thanks to Lance for the cool article. I've seen pictures of that poor TC
languishing up there, so I'm glad someone's paying attention to it.
Gordon.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121128/b757e94a/attachment.html>
From gharrower200 at gmail.com Wed Nov 28 19:29:41 2012
From: gharrower200 at gmail.com (Gordon Harrower)
Date: Wed, 28 Nov 2012 21:29:41 -0500
Subject: [Rovernet ] P5 Wheels Needed
In-Reply-To: <CACqdim8_fkkc+pjAK=c4c7sM=Ud2AxpDELhPTUdZRMwDiuys5w@mail.gmail.com>
References: <CACqdim8_fkkc+pjAK=c4c7sM=Ud2AxpDELhPTUdZRMwDiuys5w@mail.gmail.com>
Message-ID: <CACqdim87aM6j3PTDf-8Maewqsah9fKF66vvQm1a+w_A=0HoaqQ@mail.gmail.com>
Hello,
I'm looking for a complete set of plain old wheels for my P5. The ones
that came with it are older (possibly from a P4) and two are bent
irreparably, making tire balancing impossible. I'd like five, but would be
willing to piece together a set.
Thanks to Lance for the cool article. I've seen pictures of that poor TC
languishing up there, so I'm glad someone's paying attention to it.
Gordon.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121128/e23e819d/attachment.html>
From vern at inkspotco.com Fri Nov 30 10:36:48 2012
From: vern at inkspotco.com (Vern Klukas)
Date: Fri, 30 Nov 2012 09:36:48 -0800
Subject: [Rovernet ] FW: Rover 3500s in the Dallas Area
In-Reply-To: <SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
References: <CAKFqmH_K1XmBh+av3UzGYG0yOurYH=sFU9c3fwCDkmiCLK1Orw@mail.gmail.com>,
<SNT143-W3AA2EEDDDCEE163EE39089AED0@phx.gbl>
<SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
Message-ID: <5DE8DECA-0DBC-4172-8380-AF92ABCE4B39@inkspotco.com>
The link does't work, and there does't appear to be any such ad on the Dallas Craigslist site.
Yours
Vern
On 2012-07-06, at 5:52 PM, Brad Bowen <bradford.bowen at hotmail.com> wrote:
>
>
>
>
>
> Hello, I have a Rover P6B for sale. The add is in the Dallas Craigslist. It is a nice 1970 3500s with 25k miles. Here is the link to the add:
>
> http://dallas.craigslist.org/ndf/cto/3108665881.html
>
> Thank You,
> Brad Bowen
> 972-207-1115 Cell
>
>
> Date: Fri, 6 Jul 2012 18:29:55 -0500
> Subject: Rover
> From: alal30319 at gmail.com
> To: wxkkm-3108665881 at sale.craigslist.org
>
> ** CRAIGSLIST ADVISORY --- AVOID SCAMS BY DEALING LOCALLY
> ** Avoid: wiring money, cross-border deals, work-at-home
> ** Beware: cashier checks, money orders, escrow, shipping
> ** More Info: http://www.craigslist.org/about/scams
>
>
>
> I used to have one of these several years ago. My father had one too back in England back in the 70's. I'd love to have another one but with 17 cars, I'm in the same boat as you. My car was bought by a fellow called Kent Kinnard who is active on the Rover forum and lives in Texas. You may wish to try to locate him.
>
>
> Good luck with the sale.
>
> With best regards
>
> Al
>
>
>
>
> This message was remailed to you via: wxkkm-3108665881 at sale.craigslist.org
> If this email is a scam or spam please flag it now:
> http://www.craigslist.org/flag/20120706232956pKfHfsLH4RGWk0jkSdfpbw
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20120706/af8880ca/attachment.html>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
Inkspot Type & Design 250 864 5619 in at inkspotco.com
From peter at king-co.com Fri Nov 30 10:41:44 2012
From: peter at king-co.com (peter king)
Date: Fri, 30 Nov 2012 12:41:44 -0500
Subject: [Rovernet ] 1962 P5 in South Carolina Craigslist
In-Reply-To: <SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
References: <CAKFqmH_K1XmBh+av3UzGYG0yOurYH=sFU9c3fwCDkmiCLK1Orw@mail.gmail.com>,
<SNT143-W3AA2EEDDDCEE163EE39089AED0@phx.gbl>
<SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
Message-ID: <FC434010-A4CB-4B1C-B63B-EBBF14C4CD6A@king-co.com>
Stumbled on this 1962 P5 in Charleston Craigslist today? no photos.
Peter
http://charleston.craigslist.org/cto/3419196041.html
Peter King + Company
21 Drydock Avenue
Floor 7
Boston, MA 02210
617-292-7877
www.king-co.com
From LouatLCF at aol.com Fri Nov 30 11:39:03 2012
From: LouatLCF at aol.com (LouatLCF at aol.com)
Date: Fri, 30 Nov 2012 13:39:03 -0500 (EST)
Subject: [Rovernet ] Rover Parts
Message-ID: <19a89.5e1f51b5.3dea5747@aol.com>
Hi Roland:
I am interested in your tool kit and the shift knob for my 66 Rover P6 2000
TC. I can offer you $40 plus shipping for it and the shift knob $20 plus
shipping. Can pay with pay pal or by USPO money order. Please advise. I live
in the Los Angeles area zip code 91011.
Thanks, Lou LeBlanc, La Canada, CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121130/f3c2c690/attachment.html>
From bradford.bowen at hotmail.com Fri Nov 30 14:29:17 2012
From: bradford.bowen at hotmail.com (Brad Bowen)
Date: Fri, 30 Nov 2012 15:29:17 -0600
Subject: [Rovernet ] FW: Rover 3500s in the Dallas Area
In-Reply-To: <5DE8DECA-0DBC-4172-8380-AF92ABCE4B39@inkspotco.com>
References: <CAKFqmH_K1XmBh+av3UzGYG0yOurYH=sFU9c3fwCDkmiCLK1Orw@mail.gmail.com>,
, <SNT143-W3AA2EEDDDCEE163EE39089AED0@phx.gbl>,
<SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>,
<5DE8DECA-0DBC-4172-8380-AF92ABCE4B39@inkspotco.com>
Message-ID: <SNT143-W431F9A4A690CB8368E0B8E9A430@phx.gbl>
Hello Vern,The Rover is sold. Brad
> From: vern at inkspotco.com
> Date: Fri, 30 Nov 2012 09:36:48 -0800
> To: rovernet at rovernet.ca
> Subject: Re: [Rovernet ] FW: Rover 3500s in the Dallas Area
>
>
> The link does't work, and there does't appear to be any such ad on the Dallas Craigslist site.
>
> Yours
> Vern
>
>
> On 2012-07-06, at 5:52 PM, Brad Bowen <bradford.bowen at hotmail.com> wrote:
>
> >
> >
> >
> >
> >
> > Hello, I have a Rover P6B for sale. The add is in the Dallas Craigslist. It is a nice 1970 3500s with 25k miles. Here is the link to the add:
> >
> > http://dallas.craigslist.org/ndf/cto/3108665881.html
> >
> > Thank You,
> > Brad Bowen
> > 972-207-1115 Cell
> >
> >
> > Date: Fri, 6 Jul 2012 18:29:55 -0500
> > Subject: Rover
> > From: alal30319 at gmail.com
> > To: wxkkm-3108665881 at sale.craigslist.org
> >
> > ** CRAIGSLIST ADVISORY --- AVOID SCAMS BY DEALING LOCALLY
> > ** Avoid: wiring money, cross-border deals, work-at-home
> > ** Beware: cashier checks, money orders, escrow, shipping
> > ** More Info: http://www.craigslist.org/about/scams
> >
> >
> >
> > I used to have one of these several years ago. My father had one too back in England back in the 70's. I'd love to have another one but with 17 cars, I'm in the same boat as you. My car was bought by a fellow called Kent Kinnard who is active on the Rover forum and lives in Texas. You may wish to try to locate him.
> >
> >
> > Good luck with the sale.
> >
> > With best regards
> >
> > Al
> >
> >
> >
> >
> > This message was remailed to you via: wxkkm-3108665881 at sale.craigslist.org
> > If this email is a scam or spam please flag it now:
> > http://www.craigslist.org/flag/20120706232956pKfHfsLH4RGWk0jkSdfpbw
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20120706/af8880ca/attachment.html>
> > **************************************
> > Join the back-up list or look at or post photos at:
> > http://autos.groups.yahoo.com/group/Rover_net/
> >
>
> Inkspot Type & Design 250 864 5619 in at inkspotco.com
>
>
>
>
>
> **************************************
> Join the back-up list or look at or post photos at:
> http://autos.groups.yahoo.com/group/Rover_net/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121130/1b1838bc/attachment.html>
From pilotrlt at aol.com Fri Nov 30 16:30:48 2012
From: pilotrlt at aol.com (pilotrlt at aol.com)
Date: Fri, 30 Nov 2012 18:30:48 -0500 (EST)
Subject: [Rovernet ] FW: Rover 3500s in the Dallas Area
In-Reply-To: <SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
References: <CAKFqmH_K1XmBh+av3UzGYG0yOurYH=sFU9c3fwCDkmiCLK1Orw@mail.gmail.com>,
<SNT143-W3AA2EEDDDCEE163EE39089AED0@phx.gbl>
<SNT143-W43EA0C7E7506FF5E15653F9AED0@phx.gbl>
Message-ID: <8CF9D69DC9F5485-1638-39897@webmail-m030.sysops.aol.com>
Hello Brad
Why did this go out today? I wasted alot of time looking for this listing and now I see
the original message was sent back in July. Am I reading this correctly? or did the car get sold today?
Thanks
Rob
-----Original Message-----
From: Brad Bowen <bradford.bowen at hotmail.com>
To: rovernet <rovernet at rovernet.ca>
Sent: Fri, Nov 30, 2012 12:25 pm
Subject: [Rovernet ] FW: Rover 3500s in the Dallas Area
Hello, I have a Rover P6B for sale. The add is in the Dallas Craigslist. It is a
ice 1970 3500s with 25k miles. Here is the link to the add:
ttp://dallas.craigslist.org/ndf/cto/3108665881.html
hank You,
rad Bowen
72-207-1115 Cell
ate: Fri, 6 Jul 2012 18:29:55 -0500
ubject: Rover
rom: alal30319 at gmail.com
o: wxkkm-3108665881 at sale.craigslist.org
** CRAIGSLIST ADVISORY --- AVOID SCAMS BY DEALING LOCALLY
* Avoid: wiring money, cross-border deals, work-at-home
* Beware: cashier checks, money orders, escrow, shipping
* More Info: http://www.craigslist.org/about/scams
I used to have one of these several years ago. My father had one too back in
ngland back in the 70's. I'd love to have another one but with 17 cars, I'm in
he same boat as you. My car was bought by a fellow called Kent Kinnard who is
ctive on the Rover forum and lives in Texas. You may wish to try to locate him.
ood luck with the sale.
With best regards
Al
his message was remailed to you via: wxkkm-3108665881 at sale.craigslist.org
f this email is a scam or spam please flag it now:
ttp://www.craigslist.org/flag/20120706232956pKfHfsLH4RGWk0jkSdfpbw
-------------- next part --------------
n HTML attachment was scrubbed...
RL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20120706/af8880ca/attachment.html>
*************************************
oin the back-up list or look at or post photos at:
ttp://autos.groups.yahoo.com/group/Rover_net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rsj20.rhostjh.com/mailman/private/rovernet_rovernet.ca/attachments/20121130/8268a162/attachment.html>