[ROVERNET - UK] P6 2200 - inertia reel seatbelts

R. Wicke RoverP6.Wicke at web.de
Tue Jul 20 16:01:42 BST 2004



Thank you, John!

Rudiger



----- Original Message -----
From: "John Windwood" <wood at winds27.fsnet.co.uk>
To: <rovernet at lyris.ccdata.com>
Sent: Tuesday, July 20, 2004 10:57 AM
Subject: Re: [ROVERNET - UK] P6 2200 - inertia reel seatbelts


> All P6's from start to end of production have threaded mountings already
> built into the base unit. Remove the rear seat bases-one on each side
going
> into the sill and one tucked under the centre armrest. The rear parcel
shelf
> ones are different according to year-early cars (Up to around 1971) have
the
> mounting very near to the seat back to cater for static belts. After about
> 1971, they were moved further back to cater for inertia reel mountings.
> A couple of cautions though-if you want to fit inertia reels, you will
need
> one inch spacers (Box section steel) and long bolts so that the belt
clears
> the seat back-without these, the belts will catch and/or false-lock almost
> constantly. The other caution is that all the threaded mountings might not
> be there at all! It seems that Rover really did have off days when these
> cars were built-out of the four P6's I have fitted rear belts to, one had
no
> captive nuts in the inner sills at all(Although the holes were there) and
> the other had the captive nuts, but they had never been internally
> threaded!! I know these things can be easily sorted, but it's VERY
> frustrating when you want to do the job quickly and efficiently !!
> Hope this helps.
> Kind Regards
> John
> John Windwood
> rover-2000
> ----- Original Message -----
> From: "R. Wicke" <RoverP6.Wicke at web.de>
> To: <rovernet at lyris.ccdata.com>
> Sent: Monday, July 19, 2004 9:58 PM
> Subject: [ROVERNET - UK] P6 2200 - inertia reel seatbelts
>
>
> >
> > Hello Netters,
> >
> > just got a request:
> >
> > "I want to fit rear inertia reel seatbelts to my 2200SC. Do you have any
> > information on where the attachment points are located ?"
> >
> > Any info?
> >
> > Thanks and regards,
> >
> > Rudiger
> > www.RoverP6.info
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "R. Wicke" <RoverP6.Wicke at web.de>
> > To: <rovernet at lyris.ccdata.com>
> > Sent: Monday, July 19, 2004 4:39 PM
> > Subject: rovernet archives
> >
> >
> > >
> > > Hmmm, just tried to visit the archives, enter my email address and
> > > password -> failure
> > >
> > > Why?
> > >
> > > Rudiger
> > > www.RoverP6.info
> > >
> > >
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the bottom and follow
> instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
> >
>
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow
instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet




More information about the rovernet mailing list