[ROVERNET - UK] oil anyone?

[Fritz Rauschenberg]

Tell us about Nulon.

Fritz Rauschenberg
Atlanta

Paul Smith wrote:

> I thoroughly recommend Nulon when engine has had a rebuild.
> Don't know about worn enignes.
>
> PVS
>
> ----- Original Message -----
> From: "Mike Shaddick" <mikshdik at ozemail.com.au>
> To: <rovernet at lyris.ccdata.com>
> Cc: <Rover1964 at att.net>
> Sent: Saturday, October 02, 2004 5:36 PM
> Subject: Re: [ROVERNET - UK] oil anyone?
>
> > At least one tappet (hydraulic lifter) rattles like blazes, especially
> > when the engine is cold.
> >
> > The oil I have been using is Penrite HPR 30, which is a 20/60 multigrade.
> >
> > My inclination is to give the motor a good flush with a commercial flush
> > additive followed by a second flush with light (sae 10) and then to fill
> > with straight sae30 (asb Fritz) - with a Nulon Teflon additive.
> >
> > This is to avoid stripping the top end down to get at the lifter (s) and
> > replacing it (them)
> >
> > Please let me have your thoughts.
> >
> > kanjane
> >
> >
> >
> > _______________________________________________
> > rovernet mailing list
> > rovernet at lyris.ccdata.com
> > To unsubscribe, go to this web page, look near the bottom and follow
> > instructions:
> > http://mailman.nipltd.com/mailman/listinfo/rovernet
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet