[ROVERNET - UK] P6B Expansion Tank

A.G. Opstal van agOpstal at poelmann.nl
Sun Feb 13 11:35:24 GMT 2005


Piece of cake.
Take the bottle of a SD1.
Mount it to the innner wheel well.
Screw the pressurecap of the radiator
on the bottle and cap of the radiator
with a blankcap so the coolant can
freely flow from and to the bottle.

I send a picture to your private mailaddress.

Lex van Opstal.

-----Oorspronkelijk bericht-----
Van: rovernet-bounces at lyris.ccdata.com
[mailto:rovernet-bounces at lyris.ccdata.com] Namens Ray Wilkins
Verzonden: zondag 13 februari 2005 12:17
Aan: rovernet at lyris.ccdata.com
Onderwerp: [ROVERNET - UK] P6B Expansion Tank

I am considering installing an expansion tank to take up the overflow
from the radiator in my P6B. I was always a bit concerned at the loss of
coolant once the car had stopped from the overflow pipe and had heard of
others doing this mod. I would be really keen to hear from any other
'Rovernetters' who have carried out this mod. and what their experiences
were; how they did it and what they used. I am concerned at the lack of
space between the brake servo unit and the alternator. I look forward to
numerous replies.


Ray Wilkins
Melbourne, Australia
1976 P6B

rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow
instructions: http://mailman.nipltd.com/mailman/listinfo/rovernet

More information about the rovernet mailing list