[ROVERNET - UK] SD1 Rear Brake Cylinder Kit
jaguru at bellsouth.net
Wed Aug 22 16:05:59 BST 2007
I don't know who you had sleeve them; but you might contact them. I do not
know if White Post actually rebuilds, or just offers kits. Apple Hydraulics
rebuilds, and buys seals in quantities. They are very good about warrantee,
even years later.They may have the seals, though they probably would prefer
you send them the caliper to properly resleeve. call them, hit #4, and ask
for Lazar. James Dean, Ft. Lauderdale.
----- Original Message -----
From: "vic muscat" <vic94087 at yahoo.com>
To: <rovernet at lyris.ccdata.com>
Sent: Wednesday, August 22, 2007 7:24 AM
Subject: [ROVERNET - UK] SD1 Rear Brake Cylinder Kit
> Has any SD1 owner on this list found a readily
> obtainable rear brake cylinder repair kit which can be
> used instead of the Rover kit? I just need the rubber
> The bore they go into is 7/8th inch. The ID fits over
> a 19/32s portion of the piston. It is 3/16th wide
> (thick). I can't believe someone else hasn't used
> those same dimensions. Unfortunately, I don't have
> access to parts manuals which might have a clue.
> I ordered a kit from Rimmer last week and they haven't
> yet acknowledged receipt of the order.
> About 10 years ago I had the brake cylinders sleeved
> with brass. But one of the sleeves had a razor sharp
> burr, which I failed to notice, and it nicked the seal
> on assembly. It is now leaking.
> Thank you for your help,
> Shape Yahoo! in your own image. Join our Network Research Panel today!
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow
> Back-up list and photos at:
More information about the rovernet