[ROVERNET - UK] Re: rear brake bleed line?

Vern Klukas vern at inkspotco.com
Fri Dec 21 18:48:49 GMT 2007


Pretty simple, all you need is a short piece of brake pipe with male 
ends and a male to male adapter. Pipe goes where the bleed screw was, 
male adapter goes on the end of the pipe and the bleed screw goes in 
the male adapter and you are good to go.

Yours
Vern






>In the photo, it seems you have attached a long brake pipe to the 
>bleed screw hole, making the bleed much easier. How? thanks!
>Geff and Julie McCarthy
>AvMedSafe
>503-241-8468 home
>503-799-3809 cell
>----- Original Message ----- From: "Anders Hedelund" <anders at xoz.dk>
>To: <rovernet at lyris.ccdata.com>
>Sent: Thursday, December 20, 2007 6:58 AM
>Subject: [ROVERNET - UK] Getting on - and some photos
>
>>Our house by the sea was burglarized yesterday, so after cleaning 
>>the mess I had an opportunity to go to the workshop and do a couple 
>>of long postponed things:
>>
>>Coolant expansion tank: 
>>http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4268.html shows a 
>>FIAT unpressurized tank behind left hand light unit. It was still 
>>half full after 10 years of storage.
>>
>>Bleeding rear brakes: 
>>http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4282.html and on 
>>shows how I used an additional length of tube to get easy access 
>>for the otherwise awkward job.
>>
>>Front inertia seat belts in MK1 cars: 
>>http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4292.html  and on 
>>shows how I did it.
>>
>>All three things have been previously discussed and described here 
>>in Rovernet.
>>
>>..Anders, Denmark
>>
>>_______________________________________________
>>rovernet mailing list
>>rovernet at lyris.ccdata.com
>>To unsubscribe, go to this web page, look near the bottom and 
>>follow instructions:
>>http://mailman.nipltd.com/mailman/listinfo/rovernet
>>Back-up list and photos at:
>>http://autos.groups.yahoo.com/group/Rover_net/
>
>
>_______________________________________________
>rovernet mailing list
>rovernet at lyris.ccdata.com
>To unsubscribe, go to this web page, look near the bottom and follow 
>instructions:
>http://mailman.nipltd.com/mailman/listinfo/rovernet
>Back-up list and photos at:
>http://autos.groups.yahoo.com/group/Rover_net/


-- 
Vern Klukas                             I'm a little . . .
Inkspot Type & Design
vern at inkspotco.com



More information about the rovernet mailing list