[ROVERNET - UK] Re: rear brake bleed line?

[geffandjulie]

In the photo, it seems you have attached a long brake pipe to the bleed 
screw hole, making the bleed much easier. How? thanks!
Geff and Julie McCarthy
AvMedSafe
503-241-8468 home
503-799-3809 cell
----- Original Message ----- 
From: "Anders Hedelund" <anders at xoz.dk>
To: <rovernet at lyris.ccdata.com>
Sent: Thursday, December 20, 2007 6:58 AM
Subject: [ROVERNET - UK] Getting on - and some photos


> Our house by the sea was burglarized yesterday, so after cleaning the mess 
> I had an opportunity to go to the workshop and do a couple of long 
> postponed things:
>
> Coolant expansion tank: 
> http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4268.html shows a FIAT 
> unpressurized tank behind left hand light unit. It was still half full 
> after 10 years of storage.
>
> Bleeding rear brakes: 
> http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4282.html and on shows how 
> I used an additional length of tube to get easy access for the otherwise 
> awkward job.
>
> Front inertia seat belts in MK1 cars: 
> http://xoz.dk/ahl/auto/AfterFredFlintstone/ahl_4292.html  and on shows how 
> I did it.
>
> All three things have been previously discussed and described here in 
> Rovernet.
>
> ..Anders, Denmark
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions:
> http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at:
> http://autos.groups.yahoo.com/group/Rover_net/