R: [ROVERNET - UK] Classics in scrapeyards and depts

[Ruotolo Gianluca (MERCATO STAFF)]

http://www.repubblica.it/motori/rottami/index.html

Have a look, it' s extremely intresting.

In particular, see " Altre marche" .There is an incredible photo of a dept in naples, there are cars sequestrated in the 40 ties and 50 ties because they were used for smuggling.

They were not selled becaude the criminals could have bought them, so They' re still there.

Incredible.

Best regards, gianluca.
-----Messaggio originale-----
Da: rovernet-bounces at lyris.ccdata.com [mailto:rovernet-bounces at lyris.ccdata.com] Per conto di phing
Inviato: lunedì 4 febbraio 2008 5.01
A: rovernet at lyris.ccdata.com
Oggetto: Re: [ROVERNET - UK] P6 Brakes - even more ??s


Hi Guys
 Yes I had found the locking tabs , and flattened them  before my cry for help . I bought a Canadian Tire breaker bar this afternoon 
, but had trouble getting it into position . I would have done better if I had access to a lift . I finally shifted 4 of the nuts 
with a combination of heat and the impact wrench . I will try Ruth's trick of a big hammer and a drift tomorrow .  As an aside can any one explain why some E Bay vendors will not ship outside of the continental USA . Canada is only just the other 
side of the " world's longest undefended border " We are supposed to have free trade agreement , which in theory should work both 
ways ?
Cheers
 Patrick

----- Original Message ----- 
From: "Eric Russell" <p6rovers at yahoo.com>
To: <rovernet at lyris.ccdata.com>
Sent: Sunday, February 03, 2008 6:14 PM
Subject: Re: [ROVERNET - UK] P6 Brakes - even more ??s


> That's an excellent tip for a "first-timer".
> Otherwise, "No way, Jose".
>
> Eric
>
> --- Netspace <vmitps at netspace.net.au> wrote:
>
>> Presumably you lifted the tabs?
>> I have never had any real trouble.
>>
>> ----- Original Message -----
>> From: "phing" <phing at videotron.ca>
>> To: <rovernet at lyris.ccdata.com>
>> Sent: Sunday, February 03, 2008 5:04 PM
>> Subject: [ROVERNET - UK] P6 Brakes - even more ??s
>>
>>
>> > Hi
>> > I've decided to remove the diff to get at the rear
>> brakes . I can't move
>> > the bolts securing the drive shafts to the discs .
>> So far I've used
>> > penetrating oils , extensions on socket wrench
>> ratchets , and a DeWalt
>> > electric impact wrench,   with no results . What's
>> the next step ? Heat ,
>> > it's a bit close to the fuel pump and piping ?
>> Clever applied violence
>> > using jacks and ring spanners ?? Is it possible to
>> shear the bolts if I
>> > try too hard ?
>> > As  always any advice will be welcome
>> > Cheers
>> > Patrick
>> >
>> > _______________________________________________
>> > rovernet mailing list
>> > rovernet at lyris.ccdata.com
>> > To unsubscribe, go to this web page, look near the
>> bottom and follow
>> > instructions:
>> >
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> > Back-up list and photos at: 
>> > http://autos.groups.yahoo.com/group/Rover_net/
>> >
>> >
>> > --
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition. Version: 7.5.516 /
>> Virus Database:
>> > 269.19.19/1256 - Release Date: 2/02/2008 1:50 PM
>> >
>> >
>>
>> _______________________________________________
>> rovernet mailing list
>> rovernet at lyris.ccdata.com
>> To unsubscribe, go to this web page, look near the
>> bottom and follow instructions: 
>> http://mailman.nipltd.com/mailman/listinfo/rovernet
>> Back-up list and photos at: 
>> http://autos.groups.yahoo.com/group/Rover_net/
>>
>
>
> Webmaster of The Rover Car Club of Canada
> Website:  http://www.roverclub.ca/
> Webmaster of a variety of sites from:
> http://www.websrus.ca
>
>
>      
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
>
> _______________________________________________
> rovernet mailing list
> rovernet at lyris.ccdata.com
> To unsubscribe, go to this web page, look near the bottom and follow 
> instructions: http://mailman.nipltd.com/mailman/listinfo/rovernet
> Back-up list and photos at: 
> http://autos.groups.yahoo.com/group/Rover_net/
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.19/1256 - Release Date: 2/2/2008 1:50 PM
>
> 


_______________________________________________
rovernet mailing list
rovernet at lyris.ccdata.com
To unsubscribe, go to this web page, look near the bottom and follow instructions: http://mailman.nipltd.com/mailman/listinfo/rovernet
Back-up list and photos at: http://autos.groups.yahoo.com/group/Rover_net/